Dorman 615-451 Engine Intake Manifold
OE-Style Intake Manifold for VW and Audi
Dorman 615-451 is an engine intake manifold for select Volkswagen and Audi vehicles with a known runner system failure pattern. It replaces the original manifold with an OE FIX design that uses a durable cast aluminum linkage instead of the factory plastic piece, helping address the common P2015 fault and rough-running concerns tied to runner flap movement.
Built for direct replacement service on applications such as Audi A3 Quattro, Audi Q3, Volkswagen Tiguan, Volkswagen GTI, and Volkswagen Jetta, this manifold is designed around the original layout and includes gaskets for the upstream and downstream sealing points. The factory IMRC sensor is not included and can typically be reused.
Key Features
- OE FIX intake manifold for select Volkswagen and Audi 2.0L applications
- Durable cast aluminum linkage replaces the original plastic linkage
- Addresses runner flap linkage failure associated with P2015 DTC
- Includes gaskets for both manifold sealing ends
- Black plastic manifold construction
- Factory IMRC sensor is reused to reduce replacement cost
- Street legal and EGR ready
Detailed Description
Dorman 615-451 is engineered as a direct replacement intake manifold for vehicles that use an intake manifold runner control system prone to linkage breakage from heat, carbon buildup, and spring tension. By upgrading the linkage to cast aluminum, this manifold provides a more durable solution while retaining the original sensor strategy and manifold architecture. It is a practical repair choice for Volkswagen Tiguan, Volkswagen GTI, Audi TT Quattro, and other listed applications where intake runner faults can trigger drivability issues and diagnostic trouble codes.
This part cross-references Genuine 06J133201BH for the same application.
What It Helps Fix
- Rough idle or rough running caused by intake runner malfunction
- P2015 diagnostic trouble code related to runner flap position
- Broken or worn intake manifold runner linkage
- Runner flap movement problems from carbon obstruction
- Heat-related failure of the original plastic linkage
Installation Notes and Tips
- Verify engine and vehicle application before installation using the listed fitment.
- Reuse the factory IMRC sensor when serviceable, since it is not included.
- Inspect the intake tract and runner area for carbon buildup before reassembly.
- Use the included gaskets for proper sealing at both manifold ends.
- Confirm all vacuum and electrical connections are seated correctly after installation.
Quality Assurance
Dorman designs OE-style replacement components to address known failure points in original equipment parts. Part number 615-451 follows that approach with a reinforced linkage design for long-term service on select Volkswagen and Audi vehicles.
Compatible With: Fits 2015-2019 Audi A3 Quattro, Fits 2013 Audi A3 Quattro, Fits 2015-2019 Audi Q3, Fits 2019 Volkswagen Tiguan, Fits 2009-2017 Volkswagen Tiguan, Fits 2017-2018 Volkswagen Tiguan Limited, Fits 2009-2017 Volkswagen CC, Fits 2011-2016 Volkswagen Eos, Fits 2009-2014 Audi TT, Fits 2009-2014 Audi TT Quattro, Fits 2006-2014 Volkswagen GTI, Fits 2012-2013 Volkswagen Beetle, Fits 2013 Volkswagen Golf, Fits 2008-2013 Volkswagen Jetta, Fits 2008-2010 Volkswagen Passat, Fits 2009-2010 Volkswagen Passat CC, Fits 2006-2009 Volkswagen Bora.
Original: $412.48
-65%$412.48
$144.37Dorman 615-451 Engine Intake Manifold
OE-Style Intake Manifold for VW and Audi
Dorman 615-451 is an engine intake manifold for select Volkswagen and Audi vehicles with a known runner system failure pattern. It replaces the original manifold with an OE FIX design that uses a durable cast aluminum linkage instead of the factory plastic piece, helping address the common P2015 fault and rough-running concerns tied to runner flap movement.
Built for direct replacement service on applications such as Audi A3 Quattro, Audi Q3, Volkswagen Tiguan, Volkswagen GTI, and Volkswagen Jetta, this manifold is designed around the original layout and includes gaskets for the upstream and downstream sealing points. The factory IMRC sensor is not included and can typically be reused.
Key Features
- OE FIX intake manifold for select Volkswagen and Audi 2.0L applications
- Durable cast aluminum linkage replaces the original plastic linkage
- Addresses runner flap linkage failure associated with P2015 DTC
- Includes gaskets for both manifold sealing ends
- Black plastic manifold construction
- Factory IMRC sensor is reused to reduce replacement cost
- Street legal and EGR ready
Detailed Description
Dorman 615-451 is engineered as a direct replacement intake manifold for vehicles that use an intake manifold runner control system prone to linkage breakage from heat, carbon buildup, and spring tension. By upgrading the linkage to cast aluminum, this manifold provides a more durable solution while retaining the original sensor strategy and manifold architecture. It is a practical repair choice for Volkswagen Tiguan, Volkswagen GTI, Audi TT Quattro, and other listed applications where intake runner faults can trigger drivability issues and diagnostic trouble codes.
This part cross-references Genuine 06J133201BH for the same application.
What It Helps Fix
- Rough idle or rough running caused by intake runner malfunction
- P2015 diagnostic trouble code related to runner flap position
- Broken or worn intake manifold runner linkage
- Runner flap movement problems from carbon obstruction
- Heat-related failure of the original plastic linkage
Installation Notes and Tips
- Verify engine and vehicle application before installation using the listed fitment.
- Reuse the factory IMRC sensor when serviceable, since it is not included.
- Inspect the intake tract and runner area for carbon buildup before reassembly.
- Use the included gaskets for proper sealing at both manifold ends.
- Confirm all vacuum and electrical connections are seated correctly after installation.
Quality Assurance
Dorman designs OE-style replacement components to address known failure points in original equipment parts. Part number 615-451 follows that approach with a reinforced linkage design for long-term service on select Volkswagen and Audi vehicles.
Compatible With: Fits 2015-2019 Audi A3 Quattro, Fits 2013 Audi A3 Quattro, Fits 2015-2019 Audi Q3, Fits 2019 Volkswagen Tiguan, Fits 2009-2017 Volkswagen Tiguan, Fits 2017-2018 Volkswagen Tiguan Limited, Fits 2009-2017 Volkswagen CC, Fits 2011-2016 Volkswagen Eos, Fits 2009-2014 Audi TT, Fits 2009-2014 Audi TT Quattro, Fits 2006-2014 Volkswagen GTI, Fits 2012-2013 Volkswagen Beetle, Fits 2013 Volkswagen Golf, Fits 2008-2013 Volkswagen Jetta, Fits 2008-2010 Volkswagen Passat, Fits 2009-2010 Volkswagen Passat CC, Fits 2006-2009 Volkswagen Bora.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE-Style Intake Manifold for VW and Audi
Dorman 615-451 is an engine intake manifold for select Volkswagen and Audi vehicles with a known runner system failure pattern. It replaces the original manifold with an OE FIX design that uses a durable cast aluminum linkage instead of the factory plastic piece, helping address the common P2015 fault and rough-running concerns tied to runner flap movement.
Built for direct replacement service on applications such as Audi A3 Quattro, Audi Q3, Volkswagen Tiguan, Volkswagen GTI, and Volkswagen Jetta, this manifold is designed around the original layout and includes gaskets for the upstream and downstream sealing points. The factory IMRC sensor is not included and can typically be reused.
Key Features
- OE FIX intake manifold for select Volkswagen and Audi 2.0L applications
- Durable cast aluminum linkage replaces the original plastic linkage
- Addresses runner flap linkage failure associated with P2015 DTC
- Includes gaskets for both manifold sealing ends
- Black plastic manifold construction
- Factory IMRC sensor is reused to reduce replacement cost
- Street legal and EGR ready
Detailed Description
Dorman 615-451 is engineered as a direct replacement intake manifold for vehicles that use an intake manifold runner control system prone to linkage breakage from heat, carbon buildup, and spring tension. By upgrading the linkage to cast aluminum, this manifold provides a more durable solution while retaining the original sensor strategy and manifold architecture. It is a practical repair choice for Volkswagen Tiguan, Volkswagen GTI, Audi TT Quattro, and other listed applications where intake runner faults can trigger drivability issues and diagnostic trouble codes.
This part cross-references Genuine 06J133201BH for the same application.
What It Helps Fix
- Rough idle or rough running caused by intake runner malfunction
- P2015 diagnostic trouble code related to runner flap position
- Broken or worn intake manifold runner linkage
- Runner flap movement problems from carbon obstruction
- Heat-related failure of the original plastic linkage
Installation Notes and Tips
- Verify engine and vehicle application before installation using the listed fitment.
- Reuse the factory IMRC sensor when serviceable, since it is not included.
- Inspect the intake tract and runner area for carbon buildup before reassembly.
- Use the included gaskets for proper sealing at both manifold ends.
- Confirm all vacuum and electrical connections are seated correctly after installation.
Quality Assurance
Dorman designs OE-style replacement components to address known failure points in original equipment parts. Part number 615-451 follows that approach with a reinforced linkage design for long-term service on select Volkswagen and Audi vehicles.
Compatible With: Fits 2015-2019 Audi A3 Quattro, Fits 2013 Audi A3 Quattro, Fits 2015-2019 Audi Q3, Fits 2019 Volkswagen Tiguan, Fits 2009-2017 Volkswagen Tiguan, Fits 2017-2018 Volkswagen Tiguan Limited, Fits 2009-2017 Volkswagen CC, Fits 2011-2016 Volkswagen Eos, Fits 2009-2014 Audi TT, Fits 2009-2014 Audi TT Quattro, Fits 2006-2014 Volkswagen GTI, Fits 2012-2013 Volkswagen Beetle, Fits 2013 Volkswagen Golf, Fits 2008-2013 Volkswagen Jetta, Fits 2008-2010 Volkswagen Passat, Fits 2009-2010 Volkswagen Passat CC, Fits 2006-2009 Volkswagen Bora.
