Dorman 615-916 Engine Intake Manifold - Upper
OE FIX Intake Manifold for Ford F-150
This Dorman intake manifold is a direct replacement for select Ford F-150 trucks with the 5.0L Coyote engine. It addresses a known failure point in the original design by using upgraded stainless steel CMCV shafts for improved corrosion resistance.
Part number 615-916 is built for 2015-2017 Ford F-150 upper intake manifold applications and includes service-friendly details that support a cleaner repair. It is a practical choice when the original manifold has developed rough idle, backfiring, overheating, or a check engine light tied to intake manifold control issues.
Key Features
- OE FIX replacement intake manifold for select Ford F-150 5.0L applications
- Stainless steel CMCV shafts help resist corrosion better than the original carbon steel design
- Allows reuse of functional components such as the MAP sensor, actuators, and fuel hoses
- Includes seals for the MAP sensor, fuel injectors, PCV outlet, and EVAP purge valve
- Pre-installed mounting bolts and self-tapping screws are included for installation
- Black plastic construction with OEM-grade fit and finish
Detailed Description
Dorman 615-916 is engineered for 2015-2017 Ford F-150 trucks with the 5.0 liter Coyote engine where the original intake manifold can fail from corrosion at the charge motion control valve shafts. When those shafts seize or break, the manifold air flaps and position sensors can stop working, leading to drivability problems and fault codes. This replacement manifold uses stainless steel shafts to improve durability in harsh environments, including vehicles exposed to road salt.
For a professional Ford F-150 intake manifold repair, this upper manifold is designed to reduce the cost of replacing the entire assembly and related components. It is also listed under part number 615-916 for easy catalog lookup and service ordering.
This part cross-references Ford OE numbers FL3Z9424B and FL3Z9424E for the same application.
Common Problems This Part Can Address
- Rough idle caused by intake manifold control failure
- Backfiring related to manifold air flap or sensor issues
- Overheating linked to a failing upper intake manifold
- Check engine light from CMCV/IMRC-related faults
- Corrosion damage to the original manifold shafts
Installation Notes and Tips
Fits 2015-2017 Ford F-150, upper. Transfer reusable components from the original manifold as needed, including the MAP sensor, actuators, and fuel hoses. Follow factory service procedures and verify all seals and electrical connections before starting the engine.
Quality Assurance
This Dorman OE FIX manifold is built as an improved replacement for the original Ford design, with stainless steel shafts selected to better resist corrosion in demanding conditions. Installation instructions are included.
Dorman 615-916 Engine Intake Manifold - Upper
OE FIX Intake Manifold for Ford F-150
This Dorman intake manifold is a direct replacement for select Ford F-150 trucks with the 5.0L Coyote engine. It addresses a known failure point in the original design by using upgraded stainless steel CMCV shafts for improved corrosion resistance.
Part number 615-916 is built for 2015-2017 Ford F-150 upper intake manifold applications and includes service-friendly details that support a cleaner repair. It is a practical choice when the original manifold has developed rough idle, backfiring, overheating, or a check engine light tied to intake manifold control issues.
Key Features
- OE FIX replacement intake manifold for select Ford F-150 5.0L applications
- Stainless steel CMCV shafts help resist corrosion better than the original carbon steel design
- Allows reuse of functional components such as the MAP sensor, actuators, and fuel hoses
- Includes seals for the MAP sensor, fuel injectors, PCV outlet, and EVAP purge valve
- Pre-installed mounting bolts and self-tapping screws are included for installation
- Black plastic construction with OEM-grade fit and finish
Detailed Description
Dorman 615-916 is engineered for 2015-2017 Ford F-150 trucks with the 5.0 liter Coyote engine where the original intake manifold can fail from corrosion at the charge motion control valve shafts. When those shafts seize or break, the manifold air flaps and position sensors can stop working, leading to drivability problems and fault codes. This replacement manifold uses stainless steel shafts to improve durability in harsh environments, including vehicles exposed to road salt.
For a professional Ford F-150 intake manifold repair, this upper manifold is designed to reduce the cost of replacing the entire assembly and related components. It is also listed under part number 615-916 for easy catalog lookup and service ordering.
This part cross-references Ford OE numbers FL3Z9424B and FL3Z9424E for the same application.
Common Problems This Part Can Address
- Rough idle caused by intake manifold control failure
- Backfiring related to manifold air flap or sensor issues
- Overheating linked to a failing upper intake manifold
- Check engine light from CMCV/IMRC-related faults
- Corrosion damage to the original manifold shafts
Installation Notes and Tips
Fits 2015-2017 Ford F-150, upper. Transfer reusable components from the original manifold as needed, including the MAP sensor, actuators, and fuel hoses. Follow factory service procedures and verify all seals and electrical connections before starting the engine.
Quality Assurance
This Dorman OE FIX manifold is built as an improved replacement for the original Ford design, with stainless steel shafts selected to better resist corrosion in demanding conditions. Installation instructions are included.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE FIX Intake Manifold for Ford F-150
This Dorman intake manifold is a direct replacement for select Ford F-150 trucks with the 5.0L Coyote engine. It addresses a known failure point in the original design by using upgraded stainless steel CMCV shafts for improved corrosion resistance.
Part number 615-916 is built for 2015-2017 Ford F-150 upper intake manifold applications and includes service-friendly details that support a cleaner repair. It is a practical choice when the original manifold has developed rough idle, backfiring, overheating, or a check engine light tied to intake manifold control issues.
Key Features
- OE FIX replacement intake manifold for select Ford F-150 5.0L applications
- Stainless steel CMCV shafts help resist corrosion better than the original carbon steel design
- Allows reuse of functional components such as the MAP sensor, actuators, and fuel hoses
- Includes seals for the MAP sensor, fuel injectors, PCV outlet, and EVAP purge valve
- Pre-installed mounting bolts and self-tapping screws are included for installation
- Black plastic construction with OEM-grade fit and finish
Detailed Description
Dorman 615-916 is engineered for 2015-2017 Ford F-150 trucks with the 5.0 liter Coyote engine where the original intake manifold can fail from corrosion at the charge motion control valve shafts. When those shafts seize or break, the manifold air flaps and position sensors can stop working, leading to drivability problems and fault codes. This replacement manifold uses stainless steel shafts to improve durability in harsh environments, including vehicles exposed to road salt.
For a professional Ford F-150 intake manifold repair, this upper manifold is designed to reduce the cost of replacing the entire assembly and related components. It is also listed under part number 615-916 for easy catalog lookup and service ordering.
This part cross-references Ford OE numbers FL3Z9424B and FL3Z9424E for the same application.
Common Problems This Part Can Address
- Rough idle caused by intake manifold control failure
- Backfiring related to manifold air flap or sensor issues
- Overheating linked to a failing upper intake manifold
- Check engine light from CMCV/IMRC-related faults
- Corrosion damage to the original manifold shafts
Installation Notes and Tips
Fits 2015-2017 Ford F-150, upper. Transfer reusable components from the original manifold as needed, including the MAP sensor, actuators, and fuel hoses. Follow factory service procedures and verify all seals and electrical connections before starting the engine.
Quality Assurance
This Dorman OE FIX manifold is built as an improved replacement for the original Ford design, with stainless steel shafts selected to better resist corrosion in demanding conditions. Installation instructions are included.
