Dynamite Friction 4312-40023 Disc Brake Kit - Front
Brake Kit for Dakota and Durango
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-40023, is a front disc brake kit for select Dodge Dakota and Dodge Durango applications. It combines coated rotors, ceramic pads, and brake hardware components in one service package for front brake replacement.
Key Features
- Fits 2000-2002 Dodge Dakota, front, including 9 inch rear drums and 11 inch rear drums configurations
- Fits 2000-2002 Dodge Durango, front
- DFC 3000 ceramic pads are formulated for stable friction, low dust, and fade resistance
- Pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims are used for improved noise, vibration, and harshness control
- GEOSPEC coated rotors feature a silver-gray corrosion-resistant finish and are ready to install dry
- Rotors use G3000/G11H18 cast iron and a non-directional finish for even pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
Part number 4312-40023 is built around DFC GEOSPEC coated rotors and DFC 3000 ceramic brake pads for front brake service on Dodge Dakota and Dodge Durango models. The rotor coating helps resist rust, while the machined surface and non-directional finish support smoother pad bedding and quieter braking. The ceramic pad formulation is designed for consistent stopping performance across a wide temperature range, and the included brake hardware kit addresses worn or corroded hardware that can affect caliper movement and pad wear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Front brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake hardware
- Brake fade during repeated stops
- Excessive brake dust buildup on wheels
- Rust on rotor surfaces after storage or exposure to moisture
Installation Notes
Fits 2000-2002 Dodge Dakota, front, and 2000-2002 Dodge Durango, front. Verify rotor and pad application against your vehicle’s brake configuration before installation, especially on Dakota models with 9 inch rear drums or rear disc brake rotor designed for 11 inch rear drums. The rotors are shipped dry and ready to install, which reduces prep time during brake service.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented applications. DFC 3000 brake pads are post-cured for stable friction performance, and the rotors carry a 12-month warranty against defects in material and workmanship.
Original: $190.70
-65%$190.70
$66.74Dynamite Friction 4312-40023 Disc Brake Kit - Front
Brake Kit for Dakota and Durango
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-40023, is a front disc brake kit for select Dodge Dakota and Dodge Durango applications. It combines coated rotors, ceramic pads, and brake hardware components in one service package for front brake replacement.
Key Features
- Fits 2000-2002 Dodge Dakota, front, including 9 inch rear drums and 11 inch rear drums configurations
- Fits 2000-2002 Dodge Durango, front
- DFC 3000 ceramic pads are formulated for stable friction, low dust, and fade resistance
- Pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims are used for improved noise, vibration, and harshness control
- GEOSPEC coated rotors feature a silver-gray corrosion-resistant finish and are ready to install dry
- Rotors use G3000/G11H18 cast iron and a non-directional finish for even pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
Part number 4312-40023 is built around DFC GEOSPEC coated rotors and DFC 3000 ceramic brake pads for front brake service on Dodge Dakota and Dodge Durango models. The rotor coating helps resist rust, while the machined surface and non-directional finish support smoother pad bedding and quieter braking. The ceramic pad formulation is designed for consistent stopping performance across a wide temperature range, and the included brake hardware kit addresses worn or corroded hardware that can affect caliper movement and pad wear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Front brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake hardware
- Brake fade during repeated stops
- Excessive brake dust buildup on wheels
- Rust on rotor surfaces after storage or exposure to moisture
Installation Notes
Fits 2000-2002 Dodge Dakota, front, and 2000-2002 Dodge Durango, front. Verify rotor and pad application against your vehicle’s brake configuration before installation, especially on Dakota models with 9 inch rear drums or rear disc brake rotor designed for 11 inch rear drums. The rotors are shipped dry and ready to install, which reduces prep time during brake service.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented applications. DFC 3000 brake pads are post-cured for stable friction performance, and the rotors carry a 12-month warranty against defects in material and workmanship.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Brake Kit for Dakota and Durango
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-40023, is a front disc brake kit for select Dodge Dakota and Dodge Durango applications. It combines coated rotors, ceramic pads, and brake hardware components in one service package for front brake replacement.
Key Features
- Fits 2000-2002 Dodge Dakota, front, including 9 inch rear drums and 11 inch rear drums configurations
- Fits 2000-2002 Dodge Durango, front
- DFC 3000 ceramic pads are formulated for stable friction, low dust, and fade resistance
- Pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims are used for improved noise, vibration, and harshness control
- GEOSPEC coated rotors feature a silver-gray corrosion-resistant finish and are ready to install dry
- Rotors use G3000/G11H18 cast iron and a non-directional finish for even pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
Part number 4312-40023 is built around DFC GEOSPEC coated rotors and DFC 3000 ceramic brake pads for front brake service on Dodge Dakota and Dodge Durango models. The rotor coating helps resist rust, while the machined surface and non-directional finish support smoother pad bedding and quieter braking. The ceramic pad formulation is designed for consistent stopping performance across a wide temperature range, and the included brake hardware kit addresses worn or corroded hardware that can affect caliper movement and pad wear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Front brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake hardware
- Brake fade during repeated stops
- Excessive brake dust buildup on wheels
- Rust on rotor surfaces after storage or exposure to moisture
Installation Notes
Fits 2000-2002 Dodge Dakota, front, and 2000-2002 Dodge Durango, front. Verify rotor and pad application against your vehicle’s brake configuration before installation, especially on Dakota models with 9 inch rear drums or rear disc brake rotor designed for 11 inch rear drums. The rotors are shipped dry and ready to install, which reduces prep time during brake service.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented applications. DFC 3000 brake pads are post-cured for stable friction performance, and the rotors carry a 12-month warranty against defects in material and workmanship.
