Dynamite Friction 4514-73061 Disc Brake Kit - Front and Rear
Brake Kit for Audi A6 and A7 Quattro
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for drivers servicing front and rear brakes on select Audi applications. Part number 4514-73061 combines coated rotors, ceramic brake pads, and brake hardware in one brake service kit for a cleaner, more complete repair.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without extra cleaning
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- G3000/G11H18 cast iron rotor construction matched to OE specifications
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
Product Details
DFC GEOSPEC rotors are machined to tight tolerances, then finished with a non-directional surface to support even pad contact and consistent stopping feel. The coated surface is designed to resist rust better than conventional paint or zinc finishes, which is useful for daily-driven vehicles exposed to moisture and road salt. The 5000 Advanced ceramic pads are formulated for stable friction performance and are assembled with NVH-focused shims to help reduce brake noise. This part number 4514-73061 is a direct-fit brake service solution for Audi A6, Audi A6 Quattro, and Audi A7 Quattro applications listed below.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded brake hardware
- Reduced stopping consistency from worn pad friction material
- Rust buildup on exposed rotor surfaces
- Uneven pad wear related to aged hardware and caliper movement
Installation Notes
- Compatible With 2016-2018 Audi A6, front and rear, 356mm front rotors (Ate 2-piston calipers).
- Compatible With 2016-2018 Audi A6 Quattro, front and rear, 356mm front rotors (TRW 2-piston calipers).
- Compatible With 2014-2015 Audi A7 Quattro, front and rear.
- Compatible With 2016-2017 Audi A7 Quattro, front and rear.
- Compatible With 2018 Audi A7 Quattro, front and rear.
- Verify rotor size and caliper type before installation to match the listed application.
- Follow proper brake bedding procedures after installation for consistent pad transfer and braking feel.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, and every finished rotor is checked against OE specifications. DFC states that the rotors carry a 12-month warranty against defects in material and workmanship.
Dynamite Friction 4514-73061 Disc Brake Kit - Front and Rear
Brake Kit for Audi A6 and A7 Quattro
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for drivers servicing front and rear brakes on select Audi applications. Part number 4514-73061 combines coated rotors, ceramic brake pads, and brake hardware in one brake service kit for a cleaner, more complete repair.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without extra cleaning
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- G3000/G11H18 cast iron rotor construction matched to OE specifications
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
Product Details
DFC GEOSPEC rotors are machined to tight tolerances, then finished with a non-directional surface to support even pad contact and consistent stopping feel. The coated surface is designed to resist rust better than conventional paint or zinc finishes, which is useful for daily-driven vehicles exposed to moisture and road salt. The 5000 Advanced ceramic pads are formulated for stable friction performance and are assembled with NVH-focused shims to help reduce brake noise. This part number 4514-73061 is a direct-fit brake service solution for Audi A6, Audi A6 Quattro, and Audi A7 Quattro applications listed below.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded brake hardware
- Reduced stopping consistency from worn pad friction material
- Rust buildup on exposed rotor surfaces
- Uneven pad wear related to aged hardware and caliper movement
Installation Notes
- Compatible With 2016-2018 Audi A6, front and rear, 356mm front rotors (Ate 2-piston calipers).
- Compatible With 2016-2018 Audi A6 Quattro, front and rear, 356mm front rotors (TRW 2-piston calipers).
- Compatible With 2014-2015 Audi A7 Quattro, front and rear.
- Compatible With 2016-2017 Audi A7 Quattro, front and rear.
- Compatible With 2018 Audi A7 Quattro, front and rear.
- Verify rotor size and caliper type before installation to match the listed application.
- Follow proper brake bedding procedures after installation for consistent pad transfer and braking feel.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, and every finished rotor is checked against OE specifications. DFC states that the rotors carry a 12-month warranty against defects in material and workmanship.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Brake Kit for Audi A6 and A7 Quattro
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for drivers servicing front and rear brakes on select Audi applications. Part number 4514-73061 combines coated rotors, ceramic brake pads, and brake hardware in one brake service kit for a cleaner, more complete repair.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without extra cleaning
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- G3000/G11H18 cast iron rotor construction matched to OE specifications
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
Product Details
DFC GEOSPEC rotors are machined to tight tolerances, then finished with a non-directional surface to support even pad contact and consistent stopping feel. The coated surface is designed to resist rust better than conventional paint or zinc finishes, which is useful for daily-driven vehicles exposed to moisture and road salt. The 5000 Advanced ceramic pads are formulated for stable friction performance and are assembled with NVH-focused shims to help reduce brake noise. This part number 4514-73061 is a direct-fit brake service solution for Audi A6, Audi A6 Quattro, and Audi A7 Quattro applications listed below.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded brake hardware
- Reduced stopping consistency from worn pad friction material
- Rust buildup on exposed rotor surfaces
- Uneven pad wear related to aged hardware and caliper movement
Installation Notes
- Compatible With 2016-2018 Audi A6, front and rear, 356mm front rotors (Ate 2-piston calipers).
- Compatible With 2016-2018 Audi A6 Quattro, front and rear, 356mm front rotors (TRW 2-piston calipers).
- Compatible With 2014-2015 Audi A7 Quattro, front and rear.
- Compatible With 2016-2017 Audi A7 Quattro, front and rear.
- Compatible With 2018 Audi A7 Quattro, front and rear.
- Verify rotor size and caliper type before installation to match the listed application.
- Follow proper brake bedding procedures after installation for consistent pad transfer and braking feel.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, and every finished rotor is checked against OE specifications. DFC states that the rotors carry a 12-month warranty against defects in material and workmanship.
