Dynamite Friction 4312-72014 Disc Brake Kit - Front
Front Brake Kit for Hyundai Elantra, Sonata, and Tiburon
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-72014, is a front disc brake service kit built for select Hyundai applications. It combines coated rotors, ceramic pads, and brake hardware components in one package for a complete front brake refresh.
Fits 1998 Hyundai Elantra, front; Fits 1999-2001 Hyundai Elantra, front; Fits 1999-2001 Hyundai Sonata, front; Fits 1999 Hyundai Tiburon, front.
Key Features
- DFC 3000 ceramic brake pads for stable friction across a wide temperature range
- Low-dust pad formulation for cleaner wheel maintenance
- Post-cured and scorched pad construction to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors that are ready to install without additional cleaning
- G3000/G11H18 cast iron rotor construction machined to OE specifications
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
The 4312-72014 brake kit is designed for front axle service on 1998-2001 Hyundai Elantra, 1999-2001 Hyundai Sonata, and 1999 Hyundai Tiburon. The coated rotors are processed dry and shipped ready for installation, which helps reduce prep time during brake work. The ceramic pads are built for reliable stopping performance, fade resistance, and consistent friction, while the included hardware addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn hardware or uneven pad contact
- Rust buildup on rotor surfaces and rotor hats
- Excessive brake dust from older pad materials
- Uneven or premature pad wear caused by fatigued hardware
- Reduced braking consistency after rotor and pad wear
Installation Notes
Verify front axle fitment by year, model, and production date before ordering. For 1998 Hyundai Elantra applications, fitment applies to vehicles produced from 8/16/98. Clean the hub mounting surface before installing the coated rotors, and follow standard brake service procedures for pad bedding and torque specifications.
Quality Assurance
Each DFC GeoSpec rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are post-cured, scorched, and assembled with premium shims to support stable performance and reduced noise.
Dynamite Friction 4312-72014 Disc Brake Kit - Front
Front Brake Kit for Hyundai Elantra, Sonata, and Tiburon
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-72014, is a front disc brake service kit built for select Hyundai applications. It combines coated rotors, ceramic pads, and brake hardware components in one package for a complete front brake refresh.
Fits 1998 Hyundai Elantra, front; Fits 1999-2001 Hyundai Elantra, front; Fits 1999-2001 Hyundai Sonata, front; Fits 1999 Hyundai Tiburon, front.
Key Features
- DFC 3000 ceramic brake pads for stable friction across a wide temperature range
- Low-dust pad formulation for cleaner wheel maintenance
- Post-cured and scorched pad construction to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors that are ready to install without additional cleaning
- G3000/G11H18 cast iron rotor construction machined to OE specifications
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
The 4312-72014 brake kit is designed for front axle service on 1998-2001 Hyundai Elantra, 1999-2001 Hyundai Sonata, and 1999 Hyundai Tiburon. The coated rotors are processed dry and shipped ready for installation, which helps reduce prep time during brake work. The ceramic pads are built for reliable stopping performance, fade resistance, and consistent friction, while the included hardware addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn hardware or uneven pad contact
- Rust buildup on rotor surfaces and rotor hats
- Excessive brake dust from older pad materials
- Uneven or premature pad wear caused by fatigued hardware
- Reduced braking consistency after rotor and pad wear
Installation Notes
Verify front axle fitment by year, model, and production date before ordering. For 1998 Hyundai Elantra applications, fitment applies to vehicles produced from 8/16/98. Clean the hub mounting surface before installing the coated rotors, and follow standard brake service procedures for pad bedding and torque specifications.
Quality Assurance
Each DFC GeoSpec rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are post-cured, scorched, and assembled with premium shims to support stable performance and reduced noise.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Kit for Hyundai Elantra, Sonata, and Tiburon
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-72014, is a front disc brake service kit built for select Hyundai applications. It combines coated rotors, ceramic pads, and brake hardware components in one package for a complete front brake refresh.
Fits 1998 Hyundai Elantra, front; Fits 1999-2001 Hyundai Elantra, front; Fits 1999-2001 Hyundai Sonata, front; Fits 1999 Hyundai Tiburon, front.
Key Features
- DFC 3000 ceramic brake pads for stable friction across a wide temperature range
- Low-dust pad formulation for cleaner wheel maintenance
- Post-cured and scorched pad construction to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors that are ready to install without additional cleaning
- G3000/G11H18 cast iron rotor construction machined to OE specifications
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
The 4312-72014 brake kit is designed for front axle service on 1998-2001 Hyundai Elantra, 1999-2001 Hyundai Sonata, and 1999 Hyundai Tiburon. The coated rotors are processed dry and shipped ready for installation, which helps reduce prep time during brake work. The ceramic pads are built for reliable stopping performance, fade resistance, and consistent friction, while the included hardware addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn hardware or uneven pad contact
- Rust buildup on rotor surfaces and rotor hats
- Excessive brake dust from older pad materials
- Uneven or premature pad wear caused by fatigued hardware
- Reduced braking consistency after rotor and pad wear
Installation Notes
Verify front axle fitment by year, model, and production date before ordering. For 1998 Hyundai Elantra applications, fitment applies to vehicles produced from 8/16/98. Clean the hub mounting surface before installing the coated rotors, and follow standard brake service procedures for pad bedding and torque specifications.
Quality Assurance
Each DFC GeoSpec rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are post-cured, scorched, and assembled with premium shims to support stable performance and reduced noise.
