Pioneer Cables 612551 Engine Mount - Front or Front Right
Engine Mount for Cadillac, Buick, Oldsmobile and Pontiac
Pioneer Cables 612551 is an engine mount replacement for select Cadillac, Buick, Oldsmobile, and Pontiac applications. It is built for direct-fit service on vehicles that use front or front right hydraulic mounting positions, including several 1985-1993 GM full-size models.
Key Features
- Hydraulic engine mount construction for vibration isolation
- High-grade metal housing with corrosion-resistant coating or pure aluminum housing, depending on application
- Bonded rubber compound matched to the specific vehicle application
- Sure-Fit System application testing for vehicle-specific fitment
- Direct replacement for select front and front right mount locations
Detailed Description
Pioneer Cables 612551 is engineered as a replacement engine mount for select Cadillac DeVille, Cadillac Fleetwood, Cadillac 60 Special, Buick LeSabre, Oldsmobile Delta 88, Oldsmobile 98, and Pontiac Bonneville models. The hydraulic design helps absorb engine vibration and reduce movement at the mount point, supporting smoother operation in the front or front right position where specified. This part cross-references Anchor 2552 for the same application.
The mount housing is manufactured from durable metal or cast aluminum, then paired with a blended rubber compound tailored to the application. Pioneer’s Sure-Fit System uses vehicle-specific testing to help ensure the mount matches the intended installation point. Part number 612551 is a practical choice when replacing a worn hydraulic engine mount on GM rear-wheel-drive platforms from the mid-1980s through early 1990s.
Vehicle Fitment
- Fits 1993 Cadillac 60 Special, front
- Fits 1988-1993 Cadillac DeVille, front right
- Fits 1988-1992 Cadillac Fleetwood, front right
- Fits 1988-1992 Cadillac Fleetwood, front
- Fits 1986-1991 Buick LeSabre, front right, hydraulic 2nd design
- Fits 1986-1991 Oldsmobile Delta 88, front right, hydraulic 2nd design
- Fits 1987-1991 Pontiac Bonneville, front right
- Fits 1985-1990 Oldsmobile 98, front right, hydraulic 2nd design
- Fits 1985-1987 Cadillac DeVille, front right, hydraulic 2nd & 3rd design
- Fits 1985-1987 Cadillac Fleetwood, front, hydraulic 2nd design
- Fits 1985 Cadillac DeVille, front right, hydraulic 2nd design
- Fits 1985 Cadillac Fleetwood, front right, hydraulic 2nd design
- Fits 1985 Oldsmobile 98, front, hydraulic 2nd design
Installation Notes and Tips
Confirm the mount position and hydraulic design before ordering, since this part is listed for both front and front right locations with application-specific notes. Verify the vehicle’s year, make, model, and design revision against the existing mount before installation. For best results, inspect adjacent engine support components for wear while replacing the mount.
Quality Assurance
Pioneer Mounts use application testing on vehicle-specific fixtures and are manufactured with durable housing materials and application-matched rubber compounds to support consistent fit and vibration control.
Pioneer Cables 612551 Engine Mount - Front or Front Right
Engine Mount for Cadillac, Buick, Oldsmobile and Pontiac
Pioneer Cables 612551 is an engine mount replacement for select Cadillac, Buick, Oldsmobile, and Pontiac applications. It is built for direct-fit service on vehicles that use front or front right hydraulic mounting positions, including several 1985-1993 GM full-size models.
Key Features
- Hydraulic engine mount construction for vibration isolation
- High-grade metal housing with corrosion-resistant coating or pure aluminum housing, depending on application
- Bonded rubber compound matched to the specific vehicle application
- Sure-Fit System application testing for vehicle-specific fitment
- Direct replacement for select front and front right mount locations
Detailed Description
Pioneer Cables 612551 is engineered as a replacement engine mount for select Cadillac DeVille, Cadillac Fleetwood, Cadillac 60 Special, Buick LeSabre, Oldsmobile Delta 88, Oldsmobile 98, and Pontiac Bonneville models. The hydraulic design helps absorb engine vibration and reduce movement at the mount point, supporting smoother operation in the front or front right position where specified. This part cross-references Anchor 2552 for the same application.
The mount housing is manufactured from durable metal or cast aluminum, then paired with a blended rubber compound tailored to the application. Pioneer’s Sure-Fit System uses vehicle-specific testing to help ensure the mount matches the intended installation point. Part number 612551 is a practical choice when replacing a worn hydraulic engine mount on GM rear-wheel-drive platforms from the mid-1980s through early 1990s.
Vehicle Fitment
- Fits 1993 Cadillac 60 Special, front
- Fits 1988-1993 Cadillac DeVille, front right
- Fits 1988-1992 Cadillac Fleetwood, front right
- Fits 1988-1992 Cadillac Fleetwood, front
- Fits 1986-1991 Buick LeSabre, front right, hydraulic 2nd design
- Fits 1986-1991 Oldsmobile Delta 88, front right, hydraulic 2nd design
- Fits 1987-1991 Pontiac Bonneville, front right
- Fits 1985-1990 Oldsmobile 98, front right, hydraulic 2nd design
- Fits 1985-1987 Cadillac DeVille, front right, hydraulic 2nd & 3rd design
- Fits 1985-1987 Cadillac Fleetwood, front, hydraulic 2nd design
- Fits 1985 Cadillac DeVille, front right, hydraulic 2nd design
- Fits 1985 Cadillac Fleetwood, front right, hydraulic 2nd design
- Fits 1985 Oldsmobile 98, front, hydraulic 2nd design
Installation Notes and Tips
Confirm the mount position and hydraulic design before ordering, since this part is listed for both front and front right locations with application-specific notes. Verify the vehicle’s year, make, model, and design revision against the existing mount before installation. For best results, inspect adjacent engine support components for wear while replacing the mount.
Quality Assurance
Pioneer Mounts use application testing on vehicle-specific fixtures and are manufactured with durable housing materials and application-matched rubber compounds to support consistent fit and vibration control.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Engine Mount for Cadillac, Buick, Oldsmobile and Pontiac
Pioneer Cables 612551 is an engine mount replacement for select Cadillac, Buick, Oldsmobile, and Pontiac applications. It is built for direct-fit service on vehicles that use front or front right hydraulic mounting positions, including several 1985-1993 GM full-size models.
Key Features
- Hydraulic engine mount construction for vibration isolation
- High-grade metal housing with corrosion-resistant coating or pure aluminum housing, depending on application
- Bonded rubber compound matched to the specific vehicle application
- Sure-Fit System application testing for vehicle-specific fitment
- Direct replacement for select front and front right mount locations
Detailed Description
Pioneer Cables 612551 is engineered as a replacement engine mount for select Cadillac DeVille, Cadillac Fleetwood, Cadillac 60 Special, Buick LeSabre, Oldsmobile Delta 88, Oldsmobile 98, and Pontiac Bonneville models. The hydraulic design helps absorb engine vibration and reduce movement at the mount point, supporting smoother operation in the front or front right position where specified. This part cross-references Anchor 2552 for the same application.
The mount housing is manufactured from durable metal or cast aluminum, then paired with a blended rubber compound tailored to the application. Pioneer’s Sure-Fit System uses vehicle-specific testing to help ensure the mount matches the intended installation point. Part number 612551 is a practical choice when replacing a worn hydraulic engine mount on GM rear-wheel-drive platforms from the mid-1980s through early 1990s.
Vehicle Fitment
- Fits 1993 Cadillac 60 Special, front
- Fits 1988-1993 Cadillac DeVille, front right
- Fits 1988-1992 Cadillac Fleetwood, front right
- Fits 1988-1992 Cadillac Fleetwood, front
- Fits 1986-1991 Buick LeSabre, front right, hydraulic 2nd design
- Fits 1986-1991 Oldsmobile Delta 88, front right, hydraulic 2nd design
- Fits 1987-1991 Pontiac Bonneville, front right
- Fits 1985-1990 Oldsmobile 98, front right, hydraulic 2nd design
- Fits 1985-1987 Cadillac DeVille, front right, hydraulic 2nd & 3rd design
- Fits 1985-1987 Cadillac Fleetwood, front, hydraulic 2nd design
- Fits 1985 Cadillac DeVille, front right, hydraulic 2nd design
- Fits 1985 Cadillac Fleetwood, front right, hydraulic 2nd design
- Fits 1985 Oldsmobile 98, front, hydraulic 2nd design
Installation Notes and Tips
Confirm the mount position and hydraulic design before ordering, since this part is listed for both front and front right locations with application-specific notes. Verify the vehicle’s year, make, model, and design revision against the existing mount before installation. For best results, inspect adjacent engine support components for wear while replacing the mount.
Quality Assurance
Pioneer Mounts use application testing on vehicle-specific fixtures and are manufactured with durable housing materials and application-matched rubber compounds to support consistent fit and vibration control.
