Walker 270-1086 Engine Camshaft Position Sensor Connector
Walker 270-1086 Camshaft Position Sensor Connector
Walker Products 270-1086 is an engine camshaft position sensor connector built for repair and replacement work on a wide range of domestic and import applications. With a 3-terminal layout, male connector body, and pin-style terminals, it supports clean electrical connection at the sensor interface for accurate engine management signal transfer.
Walker Products has supplied fuel system and engine management components since 1946, with manufacturing and engineering support focused on meeting or exceeding OEM standards. The Walker Products line includes sensors, injectors, ignition-related electrical connectors, and other engine management parts for service work across older and newer vehicles.
Key Features
- Part number 270-1086 camshaft position sensor connector
- 3-terminal design with pin terminals
- Male connector body with female terminals
- Built for engine management electrical repair
- Walker Products aftermarket replacement for select applications
Vehicle Fitment
- Fits 1998-2009 Volkswagen Pointer, N/A
- Fits 2003-2009 Volkswagen Van, N/A
- Fits 2008 Isuzu Ascender, N/A
- Fits 2008 Isuzu i-290, N/A
- Fits 2004-2007 Buick Rainier, N/A
- Fits 2005-2007 Chevrolet Cobalt, N/A
- Fits 2004-2007 Chevrolet Colorado, Exhaust
- Fits 2004-2007 Chevrolet Colorado, N/A
- Fits 2007 Chevrolet Silverado 3500, Black and Green; 3 Term. Female
- Fits 2002-2007 Chevrolet Trailblazer, N/A
- Fits 2004-2007 GMC Canyon, Exhaust
- Fits 2007 GMC Canyon, N/A
- Fits 2002-2007 GMC Envoy, N/A
- Fits 2006-2007 Hummer H3, Exhaust
- Fits 2003-2007 Isuzu Ascender, N/A
- Fits 2007 Isuzu i-290, N/A
- Fits 2007 Isuzu i-370, Exhaust
- Fits 2005-2007 Saab 9-7x, N/A
- Fits 2004-2007 Saturn Ion, N/A
- Fits 2002-2006 Chevrolet Trailblazer EXT, N/A
- Fits 2003-2006 GMC Envoy XL, N/A
- Fits 2006 Isuzu i-280, N/A
- Fits 2006 Isuzu i-350, Exhaust
- Fits 2004-2005 GMC Envoy XUV, N/A
- Fits 2002-2004 Oldsmobile Bravada, N/A
- Fits 2000-2004 Volvo S40, N/A
- Fits 2000-2004 Volvo V40, N/A
- Fits 2001-2002 Dodge Ram 2500, N/A
- Fits 1995-1998 Dodge Ram 2500, N/A
- Fits 2001-2002 Dodge Ram 3500, N/A
- Fits 1995-1998 Dodge Ram 3500, N/A
- Fits 2002 GMC Envoy XL, Angle Connector
- Fits 2000 Dodge Ram 2500, N/A
- Fits 2000 Dodge Ram 3500, N/A
- Fits 1990-1993 Dodge D250, N/A
- Fits 1990-1993 Dodge D350, N/A
- Fits 1990-1993 Dodge W250, N/A
- Fits 1990-1993 Dodge W350, N/A
- Fits 1989 Pontiac Firebird, N/A
- Fits 1986-1988 Buick LeSabre, N/A
- Fits 1986-1988 Oldsmobile Cutlass Ciera, N/A
- Fits 1987-1988 Oldsmobile Cutlass Cruiser, N/A
- Fits 1986-1988 Oldsmobile Delta 88, N/A
- Fits 1987-1988 Pontiac Bonneville, N/A
- Fits 1986-1987 Buick Century, N/A
- Fits 1986-1987 Buick Regal, N/A
- Fits 1986-1987 Buick Riviera, N/A
- Fits 1986-1987 Oldsmobile 98, N/A
- Fits 1987 Oldsmobile Toronado, N/A
- Fits 1986 Oldsmobile Toronado, N/A
What It Helps Repair
- Broken, heat-damaged, or corroded camshaft position sensor wiring connection
- Intermittent sensor signal loss at the engine management harness
- Hard-start or no-start conditions tied to connector failure
- Misfire or drivability complaints caused by poor electrical contact
- Connector damage from vibration, age, or engine bay exposure
Installation Notes
Verify connector style, terminal count, and wire routing before installation. This part cross-references Standard Ignition S-574 for the same application. For fitment-based searches, this connector is commonly selected for Chevrolet Colorado, GMC Canyon, Dodge Ram 2500, and Volvo S40 repair work where the original camshaft position sensor connector has failed.
Quality Assurance
Walker Products manufactures engine management components to meet or exceed OEM standards and specifications. The company supports production with in-house engineering, product management, and technical documentation, and operates as an ISO 9001/IATF16949 certified manufacturer.
Walker 270-1086 Engine Camshaft Position Sensor Connector
Walker 270-1086 Camshaft Position Sensor Connector
Walker Products 270-1086 is an engine camshaft position sensor connector built for repair and replacement work on a wide range of domestic and import applications. With a 3-terminal layout, male connector body, and pin-style terminals, it supports clean electrical connection at the sensor interface for accurate engine management signal transfer.
Walker Products has supplied fuel system and engine management components since 1946, with manufacturing and engineering support focused on meeting or exceeding OEM standards. The Walker Products line includes sensors, injectors, ignition-related electrical connectors, and other engine management parts for service work across older and newer vehicles.
Key Features
- Part number 270-1086 camshaft position sensor connector
- 3-terminal design with pin terminals
- Male connector body with female terminals
- Built for engine management electrical repair
- Walker Products aftermarket replacement for select applications
Vehicle Fitment
- Fits 1998-2009 Volkswagen Pointer, N/A
- Fits 2003-2009 Volkswagen Van, N/A
- Fits 2008 Isuzu Ascender, N/A
- Fits 2008 Isuzu i-290, N/A
- Fits 2004-2007 Buick Rainier, N/A
- Fits 2005-2007 Chevrolet Cobalt, N/A
- Fits 2004-2007 Chevrolet Colorado, Exhaust
- Fits 2004-2007 Chevrolet Colorado, N/A
- Fits 2007 Chevrolet Silverado 3500, Black and Green; 3 Term. Female
- Fits 2002-2007 Chevrolet Trailblazer, N/A
- Fits 2004-2007 GMC Canyon, Exhaust
- Fits 2007 GMC Canyon, N/A
- Fits 2002-2007 GMC Envoy, N/A
- Fits 2006-2007 Hummer H3, Exhaust
- Fits 2003-2007 Isuzu Ascender, N/A
- Fits 2007 Isuzu i-290, N/A
- Fits 2007 Isuzu i-370, Exhaust
- Fits 2005-2007 Saab 9-7x, N/A
- Fits 2004-2007 Saturn Ion, N/A
- Fits 2002-2006 Chevrolet Trailblazer EXT, N/A
- Fits 2003-2006 GMC Envoy XL, N/A
- Fits 2006 Isuzu i-280, N/A
- Fits 2006 Isuzu i-350, Exhaust
- Fits 2004-2005 GMC Envoy XUV, N/A
- Fits 2002-2004 Oldsmobile Bravada, N/A
- Fits 2000-2004 Volvo S40, N/A
- Fits 2000-2004 Volvo V40, N/A
- Fits 2001-2002 Dodge Ram 2500, N/A
- Fits 1995-1998 Dodge Ram 2500, N/A
- Fits 2001-2002 Dodge Ram 3500, N/A
- Fits 1995-1998 Dodge Ram 3500, N/A
- Fits 2002 GMC Envoy XL, Angle Connector
- Fits 2000 Dodge Ram 2500, N/A
- Fits 2000 Dodge Ram 3500, N/A
- Fits 1990-1993 Dodge D250, N/A
- Fits 1990-1993 Dodge D350, N/A
- Fits 1990-1993 Dodge W250, N/A
- Fits 1990-1993 Dodge W350, N/A
- Fits 1989 Pontiac Firebird, N/A
- Fits 1986-1988 Buick LeSabre, N/A
- Fits 1986-1988 Oldsmobile Cutlass Ciera, N/A
- Fits 1987-1988 Oldsmobile Cutlass Cruiser, N/A
- Fits 1986-1988 Oldsmobile Delta 88, N/A
- Fits 1987-1988 Pontiac Bonneville, N/A
- Fits 1986-1987 Buick Century, N/A
- Fits 1986-1987 Buick Regal, N/A
- Fits 1986-1987 Buick Riviera, N/A
- Fits 1986-1987 Oldsmobile 98, N/A
- Fits 1987 Oldsmobile Toronado, N/A
- Fits 1986 Oldsmobile Toronado, N/A
What It Helps Repair
- Broken, heat-damaged, or corroded camshaft position sensor wiring connection
- Intermittent sensor signal loss at the engine management harness
- Hard-start or no-start conditions tied to connector failure
- Misfire or drivability complaints caused by poor electrical contact
- Connector damage from vibration, age, or engine bay exposure
Installation Notes
Verify connector style, terminal count, and wire routing before installation. This part cross-references Standard Ignition S-574 for the same application. For fitment-based searches, this connector is commonly selected for Chevrolet Colorado, GMC Canyon, Dodge Ram 2500, and Volvo S40 repair work where the original camshaft position sensor connector has failed.
Quality Assurance
Walker Products manufactures engine management components to meet or exceed OEM standards and specifications. The company supports production with in-house engineering, product management, and technical documentation, and operates as an ISO 9001/IATF16949 certified manufacturer.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Walker 270-1086 Camshaft Position Sensor Connector
Walker Products 270-1086 is an engine camshaft position sensor connector built for repair and replacement work on a wide range of domestic and import applications. With a 3-terminal layout, male connector body, and pin-style terminals, it supports clean electrical connection at the sensor interface for accurate engine management signal transfer.
Walker Products has supplied fuel system and engine management components since 1946, with manufacturing and engineering support focused on meeting or exceeding OEM standards. The Walker Products line includes sensors, injectors, ignition-related electrical connectors, and other engine management parts for service work across older and newer vehicles.
Key Features
- Part number 270-1086 camshaft position sensor connector
- 3-terminal design with pin terminals
- Male connector body with female terminals
- Built for engine management electrical repair
- Walker Products aftermarket replacement for select applications
Vehicle Fitment
- Fits 1998-2009 Volkswagen Pointer, N/A
- Fits 2003-2009 Volkswagen Van, N/A
- Fits 2008 Isuzu Ascender, N/A
- Fits 2008 Isuzu i-290, N/A
- Fits 2004-2007 Buick Rainier, N/A
- Fits 2005-2007 Chevrolet Cobalt, N/A
- Fits 2004-2007 Chevrolet Colorado, Exhaust
- Fits 2004-2007 Chevrolet Colorado, N/A
- Fits 2007 Chevrolet Silverado 3500, Black and Green; 3 Term. Female
- Fits 2002-2007 Chevrolet Trailblazer, N/A
- Fits 2004-2007 GMC Canyon, Exhaust
- Fits 2007 GMC Canyon, N/A
- Fits 2002-2007 GMC Envoy, N/A
- Fits 2006-2007 Hummer H3, Exhaust
- Fits 2003-2007 Isuzu Ascender, N/A
- Fits 2007 Isuzu i-290, N/A
- Fits 2007 Isuzu i-370, Exhaust
- Fits 2005-2007 Saab 9-7x, N/A
- Fits 2004-2007 Saturn Ion, N/A
- Fits 2002-2006 Chevrolet Trailblazer EXT, N/A
- Fits 2003-2006 GMC Envoy XL, N/A
- Fits 2006 Isuzu i-280, N/A
- Fits 2006 Isuzu i-350, Exhaust
- Fits 2004-2005 GMC Envoy XUV, N/A
- Fits 2002-2004 Oldsmobile Bravada, N/A
- Fits 2000-2004 Volvo S40, N/A
- Fits 2000-2004 Volvo V40, N/A
- Fits 2001-2002 Dodge Ram 2500, N/A
- Fits 1995-1998 Dodge Ram 2500, N/A
- Fits 2001-2002 Dodge Ram 3500, N/A
- Fits 1995-1998 Dodge Ram 3500, N/A
- Fits 2002 GMC Envoy XL, Angle Connector
- Fits 2000 Dodge Ram 2500, N/A
- Fits 2000 Dodge Ram 3500, N/A
- Fits 1990-1993 Dodge D250, N/A
- Fits 1990-1993 Dodge D350, N/A
- Fits 1990-1993 Dodge W250, N/A
- Fits 1990-1993 Dodge W350, N/A
- Fits 1989 Pontiac Firebird, N/A
- Fits 1986-1988 Buick LeSabre, N/A
- Fits 1986-1988 Oldsmobile Cutlass Ciera, N/A
- Fits 1987-1988 Oldsmobile Cutlass Cruiser, N/A
- Fits 1986-1988 Oldsmobile Delta 88, N/A
- Fits 1987-1988 Pontiac Bonneville, N/A
- Fits 1986-1987 Buick Century, N/A
- Fits 1986-1987 Buick Regal, N/A
- Fits 1986-1987 Buick Riviera, N/A
- Fits 1986-1987 Oldsmobile 98, N/A
- Fits 1987 Oldsmobile Toronado, N/A
- Fits 1986 Oldsmobile Toronado, N/A
What It Helps Repair
- Broken, heat-damaged, or corroded camshaft position sensor wiring connection
- Intermittent sensor signal loss at the engine management harness
- Hard-start or no-start conditions tied to connector failure
- Misfire or drivability complaints caused by poor electrical contact
- Connector damage from vibration, age, or engine bay exposure
Installation Notes
Verify connector style, terminal count, and wire routing before installation. This part cross-references Standard Ignition S-574 for the same application. For fitment-based searches, this connector is commonly selected for Chevrolet Colorado, GMC Canyon, Dodge Ram 2500, and Volvo S40 repair work where the original camshaft position sensor connector has failed.
Quality Assurance
Walker Products manufactures engine management components to meet or exceed OEM standards and specifications. The company supports production with in-house engineering, product management, and technical documentation, and operates as an ISO 9001/IATF16949 certified manufacturer.
