Walker 270-1103 Engine Camshaft Position Sensor Connector
OE-Style Camshaft Position Sensor Connector
Walker 270-1103 is an OE replacement engine camshaft position sensor connector built for repairing damaged wiring at the sensor interface. It uses a 3-terminal spade design with a male connector housing and female terminals to restore a factory-style electrical connection on supported Chevrolet, GMC, Acura, and Honda applications.
Walker Products electrical pigtails use pre-terminated leads and molded OE-style housings for a direct repair fit. The 270-1103 is made with copper wire and insulation selected for heat, oil, and chemical resistance, making it a practical choice for engine bay connector repairs on vehicles such as the Honda Civic, Acura TSX, and Chevrolet Silverado 1500.
- Part number: 270-1103
- 3-terminal spade connector design
- Male connector gender with female terminals
- OE-style molded housing for factory sensor fit
- Copper wire and insulation built to OE specifications
- Direct repair solution for damaged camshaft position sensor wiring
Detailed Product Overview
This Walker camshaft position sensor connector is designed for vehicles that use a 3-pin OE-style sensor connection and need a clean harness repair. It supports direct replacement service on applications including 2001-2005 Honda Civic, 2003-2007 Honda Accord, 2002-2006 Honda CR-V, 2007-2013 Chevrolet Silverado 1500, and 2008-2014 GMC Savana 1500. The part number 270-1103 is also listed for Acura and Honda intake/exhaust sensor applications across multiple model years.
Walker 270-1103 helps restore stable electrical contact where original connectors have become brittle, corroded, heat-damaged, or loose. This OE-style pigtail is suitable for standard crimp or solder repair methods without modifying the mating component.
Common Repair Uses
- Broken or cracked camshaft position sensor connector housing
- Corroded terminals causing intermittent sensor signal loss
- Heat-damaged engine harness connector at the sensor
- Loose or poor electrical contact at the camshaft position sensor
- Drivability or emissions faults traced to connector damage
Installation Notes
Verify connector style, terminal count, and sensor location before installation. This connector uses a 3-terminal spade layout and is repaired with standard crimp or solder methods. Match the OE-style housing to the existing sensor connector on the vehicle, including intake or exhaust position where listed in the fitment data. Compatible vehicle coverage includes Honda Civic, Honda Element, Acura TSX, Acura MDX, Chevrolet Express 1500, and GMC Sierra 1500 applications shown in the fitment list.
Quality Assurance
Walker builds this electrical pigtail as an OE replacement component using copper conductors and insulation specified for resistance to heat, oil, and chemicals. The design focuses on restoring reliable sensor connectivity and factory-style fitment for long-term electrical repair.
Original: $16.67
-65%$16.67
$5.83Walker 270-1103 Engine Camshaft Position Sensor Connector
OE-Style Camshaft Position Sensor Connector
Walker 270-1103 is an OE replacement engine camshaft position sensor connector built for repairing damaged wiring at the sensor interface. It uses a 3-terminal spade design with a male connector housing and female terminals to restore a factory-style electrical connection on supported Chevrolet, GMC, Acura, and Honda applications.
Walker Products electrical pigtails use pre-terminated leads and molded OE-style housings for a direct repair fit. The 270-1103 is made with copper wire and insulation selected for heat, oil, and chemical resistance, making it a practical choice for engine bay connector repairs on vehicles such as the Honda Civic, Acura TSX, and Chevrolet Silverado 1500.
- Part number: 270-1103
- 3-terminal spade connector design
- Male connector gender with female terminals
- OE-style molded housing for factory sensor fit
- Copper wire and insulation built to OE specifications
- Direct repair solution for damaged camshaft position sensor wiring
Detailed Product Overview
This Walker camshaft position sensor connector is designed for vehicles that use a 3-pin OE-style sensor connection and need a clean harness repair. It supports direct replacement service on applications including 2001-2005 Honda Civic, 2003-2007 Honda Accord, 2002-2006 Honda CR-V, 2007-2013 Chevrolet Silverado 1500, and 2008-2014 GMC Savana 1500. The part number 270-1103 is also listed for Acura and Honda intake/exhaust sensor applications across multiple model years.
Walker 270-1103 helps restore stable electrical contact where original connectors have become brittle, corroded, heat-damaged, or loose. This OE-style pigtail is suitable for standard crimp or solder repair methods without modifying the mating component.
Common Repair Uses
- Broken or cracked camshaft position sensor connector housing
- Corroded terminals causing intermittent sensor signal loss
- Heat-damaged engine harness connector at the sensor
- Loose or poor electrical contact at the camshaft position sensor
- Drivability or emissions faults traced to connector damage
Installation Notes
Verify connector style, terminal count, and sensor location before installation. This connector uses a 3-terminal spade layout and is repaired with standard crimp or solder methods. Match the OE-style housing to the existing sensor connector on the vehicle, including intake or exhaust position where listed in the fitment data. Compatible vehicle coverage includes Honda Civic, Honda Element, Acura TSX, Acura MDX, Chevrolet Express 1500, and GMC Sierra 1500 applications shown in the fitment list.
Quality Assurance
Walker builds this electrical pigtail as an OE replacement component using copper conductors and insulation specified for resistance to heat, oil, and chemicals. The design focuses on restoring reliable sensor connectivity and factory-style fitment for long-term electrical repair.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE-Style Camshaft Position Sensor Connector
Walker 270-1103 is an OE replacement engine camshaft position sensor connector built for repairing damaged wiring at the sensor interface. It uses a 3-terminal spade design with a male connector housing and female terminals to restore a factory-style electrical connection on supported Chevrolet, GMC, Acura, and Honda applications.
Walker Products electrical pigtails use pre-terminated leads and molded OE-style housings for a direct repair fit. The 270-1103 is made with copper wire and insulation selected for heat, oil, and chemical resistance, making it a practical choice for engine bay connector repairs on vehicles such as the Honda Civic, Acura TSX, and Chevrolet Silverado 1500.
- Part number: 270-1103
- 3-terminal spade connector design
- Male connector gender with female terminals
- OE-style molded housing for factory sensor fit
- Copper wire and insulation built to OE specifications
- Direct repair solution for damaged camshaft position sensor wiring
Detailed Product Overview
This Walker camshaft position sensor connector is designed for vehicles that use a 3-pin OE-style sensor connection and need a clean harness repair. It supports direct replacement service on applications including 2001-2005 Honda Civic, 2003-2007 Honda Accord, 2002-2006 Honda CR-V, 2007-2013 Chevrolet Silverado 1500, and 2008-2014 GMC Savana 1500. The part number 270-1103 is also listed for Acura and Honda intake/exhaust sensor applications across multiple model years.
Walker 270-1103 helps restore stable electrical contact where original connectors have become brittle, corroded, heat-damaged, or loose. This OE-style pigtail is suitable for standard crimp or solder repair methods without modifying the mating component.
Common Repair Uses
- Broken or cracked camshaft position sensor connector housing
- Corroded terminals causing intermittent sensor signal loss
- Heat-damaged engine harness connector at the sensor
- Loose or poor electrical contact at the camshaft position sensor
- Drivability or emissions faults traced to connector damage
Installation Notes
Verify connector style, terminal count, and sensor location before installation. This connector uses a 3-terminal spade layout and is repaired with standard crimp or solder methods. Match the OE-style housing to the existing sensor connector on the vehicle, including intake or exhaust position where listed in the fitment data. Compatible vehicle coverage includes Honda Civic, Honda Element, Acura TSX, Acura MDX, Chevrolet Express 1500, and GMC Sierra 1500 applications shown in the fitment list.
Quality Assurance
Walker builds this electrical pigtail as an OE replacement component using copper conductors and insulation specified for resistance to heat, oil, and chemicals. The design focuses on restoring reliable sensor connectivity and factory-style fitment for long-term electrical repair.
