Centric 906.34047 Disc Brake Kit - Front and Rear
Centric OE Coated Brake Kit for BMW 328i
Centric 906.34047 is a front and rear disc brake kit built for 2008-2013 BMW 328i applications with base brakes. It combines Centric Premium black rotors with Posi Quiet brake pads to deliver OE-style braking performance, low dust, and reduced noise for everyday driving.
Centric OE Coated Brake Kit Features
- Fits 2013 BMW 328i, front and rear, base brakes
- Fits 2008-2012 BMW 328i, front and rear
- Centric OE Coated - 4 Wheel Disc Brake Kits line for complete axle service
- Front and rear vented iron rotors for consistent heat management
- Black E-coat rotor finish for added corrosion resistance
- Posi Quiet friction material with positively molded pads and shims
- Scorched pad surface for quicker bedding
- Double disc ground braking surfaces for smooth contact
- Stainless steel hardware where applicable
- Electronic wear sensor: No
Detailed Product Overview
The Centric OE Coated - 4 Wheel Disc Brake Kits line is built as a premium OE upgrade for drivers who want a direct brake service solution with matched rotors and pads. Part number 906.34047 includes vented front and rear rotors with black E-coat protection, along with Posi Quiet pads engineered for low noise and controlled dust output. For BMW 328i owners, this kit supports a clean, factory-style brake refresh while maintaining the fit and braking characteristics expected from an OE replacement setup.
Centric 906.34047 is a practical choice for BMW 328i front and rear brake service when the goal is to restore pedal feel, reduce rotor vibration, and replace worn braking components with a coordinated kit. The 12.283-inch front rotor and 11.803-inch rear rotor dimensions align with the listed applications, and the vented rotor construction helps manage heat during repeated stops.
Common Brake Service Problems This Kit Addresses
- Brake noise from worn pads or uneven pad contact
- Visible rotor corrosion or surface wear
- Brake dust buildup from aging friction material
- Pulsation or vibration caused by rotor surface variation
- Reduced stopping consistency from worn front and rear components
Installation Notes and Tips
Confirm your BMW 328i is listed with base brakes before ordering. Verify rotor dimensions, pad shape, and caliper fitment against the vehicle before installation. Clean hub surfaces thoroughly, inspect caliper hardware and slide points, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Centric designs this brake kit as an OE-style upgrade using premium black rotors and award-winning Posi Quiet pads. The combination of double disc ground rotor surfaces, multi-layered shims, and scorched pad material supports consistent braking performance and service life for BMW 328i brake maintenance.
Original: $557.83
-65%$557.83
$195.24Centric 906.34047 Disc Brake Kit - Front and Rear
Centric OE Coated Brake Kit for BMW 328i
Centric 906.34047 is a front and rear disc brake kit built for 2008-2013 BMW 328i applications with base brakes. It combines Centric Premium black rotors with Posi Quiet brake pads to deliver OE-style braking performance, low dust, and reduced noise for everyday driving.
Centric OE Coated Brake Kit Features
- Fits 2013 BMW 328i, front and rear, base brakes
- Fits 2008-2012 BMW 328i, front and rear
- Centric OE Coated - 4 Wheel Disc Brake Kits line for complete axle service
- Front and rear vented iron rotors for consistent heat management
- Black E-coat rotor finish for added corrosion resistance
- Posi Quiet friction material with positively molded pads and shims
- Scorched pad surface for quicker bedding
- Double disc ground braking surfaces for smooth contact
- Stainless steel hardware where applicable
- Electronic wear sensor: No
Detailed Product Overview
The Centric OE Coated - 4 Wheel Disc Brake Kits line is built as a premium OE upgrade for drivers who want a direct brake service solution with matched rotors and pads. Part number 906.34047 includes vented front and rear rotors with black E-coat protection, along with Posi Quiet pads engineered for low noise and controlled dust output. For BMW 328i owners, this kit supports a clean, factory-style brake refresh while maintaining the fit and braking characteristics expected from an OE replacement setup.
Centric 906.34047 is a practical choice for BMW 328i front and rear brake service when the goal is to restore pedal feel, reduce rotor vibration, and replace worn braking components with a coordinated kit. The 12.283-inch front rotor and 11.803-inch rear rotor dimensions align with the listed applications, and the vented rotor construction helps manage heat during repeated stops.
Common Brake Service Problems This Kit Addresses
- Brake noise from worn pads or uneven pad contact
- Visible rotor corrosion or surface wear
- Brake dust buildup from aging friction material
- Pulsation or vibration caused by rotor surface variation
- Reduced stopping consistency from worn front and rear components
Installation Notes and Tips
Confirm your BMW 328i is listed with base brakes before ordering. Verify rotor dimensions, pad shape, and caliper fitment against the vehicle before installation. Clean hub surfaces thoroughly, inspect caliper hardware and slide points, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Centric designs this brake kit as an OE-style upgrade using premium black rotors and award-winning Posi Quiet pads. The combination of double disc ground rotor surfaces, multi-layered shims, and scorched pad material supports consistent braking performance and service life for BMW 328i brake maintenance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric OE Coated Brake Kit for BMW 328i
Centric 906.34047 is a front and rear disc brake kit built for 2008-2013 BMW 328i applications with base brakes. It combines Centric Premium black rotors with Posi Quiet brake pads to deliver OE-style braking performance, low dust, and reduced noise for everyday driving.
Centric OE Coated Brake Kit Features
- Fits 2013 BMW 328i, front and rear, base brakes
- Fits 2008-2012 BMW 328i, front and rear
- Centric OE Coated - 4 Wheel Disc Brake Kits line for complete axle service
- Front and rear vented iron rotors for consistent heat management
- Black E-coat rotor finish for added corrosion resistance
- Posi Quiet friction material with positively molded pads and shims
- Scorched pad surface for quicker bedding
- Double disc ground braking surfaces for smooth contact
- Stainless steel hardware where applicable
- Electronic wear sensor: No
Detailed Product Overview
The Centric OE Coated - 4 Wheel Disc Brake Kits line is built as a premium OE upgrade for drivers who want a direct brake service solution with matched rotors and pads. Part number 906.34047 includes vented front and rear rotors with black E-coat protection, along with Posi Quiet pads engineered for low noise and controlled dust output. For BMW 328i owners, this kit supports a clean, factory-style brake refresh while maintaining the fit and braking characteristics expected from an OE replacement setup.
Centric 906.34047 is a practical choice for BMW 328i front and rear brake service when the goal is to restore pedal feel, reduce rotor vibration, and replace worn braking components with a coordinated kit. The 12.283-inch front rotor and 11.803-inch rear rotor dimensions align with the listed applications, and the vented rotor construction helps manage heat during repeated stops.
Common Brake Service Problems This Kit Addresses
- Brake noise from worn pads or uneven pad contact
- Visible rotor corrosion or surface wear
- Brake dust buildup from aging friction material
- Pulsation or vibration caused by rotor surface variation
- Reduced stopping consistency from worn front and rear components
Installation Notes and Tips
Confirm your BMW 328i is listed with base brakes before ordering. Verify rotor dimensions, pad shape, and caliper fitment against the vehicle before installation. Clean hub surfaces thoroughly, inspect caliper hardware and slide points, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Centric designs this brake kit as an OE-style upgrade using premium black rotors and award-winning Posi Quiet pads. The combination of double disc ground rotor surfaces, multi-layered shims, and scorched pad material supports consistent braking performance and service life for BMW 328i brake maintenance.
