Dynamite Friction 4312-54088 Disc Brake Kit - Front
Front Brake Kit for Ford Taurus, Taurus X, Five Hundred, Freestyle, and Mercury Montego
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-54088, is a front disc brake service kit built for select Ford and Mercury applications. It combines coated rotors, ceramic pads, and brake hardware components in one package for a complete front brake refresh.
Fits 2008-2009 Ford Taurus, front. Fits 2008-2009 Ford Taurus X, front. Fits 2005-2007 Ford Five Hundred, front. Fits 2005-2007 Ford Freestyle, front. Fits 2005-2007 Mercury Montego, front. This part number 4312-54088 is listed for these front applications.
Key Features
- DFC 3000 ceramic brake pads for stable friction across a wide temperature range
- Low-dust pad formulation for cleaner wheel maintenance
- Post-cured and scorched pad construction to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors that are ready to install without additional cleaning
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit is designed for drivers replacing worn front brake components on the Ford Taurus, Ford Taurus X, Ford Five Hundred, Ford Freestyle, and Mercury Montego. The rotor design follows OEM-style G3000/G11H18 cast iron specifications and is machined to tight tolerances for consistent fit and braking stability. The coated surface helps protect against corrosion, while the non-directional finish supports quieter operation and more even pad contact. The 3000 ceramic pads are formulated for reliable stopping performance, fade resistance, and low dust, making this kit a practical choice for everyday street use.
Part number 4312-54088 is a direct-fit front brake service solution for these specific vehicles and model years. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by rotor wear or surface variation
- Rust buildup on exposed rotor surfaces
- Excessive brake dust from older pad materials
- Reduced stopping consistency from heat-related fade or worn friction material
Installation Notes
Before installation, confirm front axle fitment for your exact vehicle year and model. Inspect calipers, slides, and mounting points for wear or corrosion, and replace any damaged components as needed. Clean the hub mounting surface thoroughly so the coated rotor seats flat, and follow proper brake bedding procedures after installation to help establish even pad transfer.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and every rotor is checked against OE specifications during production. The rotors carry a 12-month warranty against defects in material and workmanship. The 3000 ceramic pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Original: $229.49
-65%$229.49
$80.32Dynamite Friction 4312-54088 Disc Brake Kit - Front
Front Brake Kit for Ford Taurus, Taurus X, Five Hundred, Freestyle, and Mercury Montego
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-54088, is a front disc brake service kit built for select Ford and Mercury applications. It combines coated rotors, ceramic pads, and brake hardware components in one package for a complete front brake refresh.
Fits 2008-2009 Ford Taurus, front. Fits 2008-2009 Ford Taurus X, front. Fits 2005-2007 Ford Five Hundred, front. Fits 2005-2007 Ford Freestyle, front. Fits 2005-2007 Mercury Montego, front. This part number 4312-54088 is listed for these front applications.
Key Features
- DFC 3000 ceramic brake pads for stable friction across a wide temperature range
- Low-dust pad formulation for cleaner wheel maintenance
- Post-cured and scorched pad construction to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors that are ready to install without additional cleaning
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit is designed for drivers replacing worn front brake components on the Ford Taurus, Ford Taurus X, Ford Five Hundred, Ford Freestyle, and Mercury Montego. The rotor design follows OEM-style G3000/G11H18 cast iron specifications and is machined to tight tolerances for consistent fit and braking stability. The coated surface helps protect against corrosion, while the non-directional finish supports quieter operation and more even pad contact. The 3000 ceramic pads are formulated for reliable stopping performance, fade resistance, and low dust, making this kit a practical choice for everyday street use.
Part number 4312-54088 is a direct-fit front brake service solution for these specific vehicles and model years. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by rotor wear or surface variation
- Rust buildup on exposed rotor surfaces
- Excessive brake dust from older pad materials
- Reduced stopping consistency from heat-related fade or worn friction material
Installation Notes
Before installation, confirm front axle fitment for your exact vehicle year and model. Inspect calipers, slides, and mounting points for wear or corrosion, and replace any damaged components as needed. Clean the hub mounting surface thoroughly so the coated rotor seats flat, and follow proper brake bedding procedures after installation to help establish even pad transfer.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and every rotor is checked against OE specifications during production. The rotors carry a 12-month warranty against defects in material and workmanship. The 3000 ceramic pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Kit for Ford Taurus, Taurus X, Five Hundred, Freestyle, and Mercury Montego
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-54088, is a front disc brake service kit built for select Ford and Mercury applications. It combines coated rotors, ceramic pads, and brake hardware components in one package for a complete front brake refresh.
Fits 2008-2009 Ford Taurus, front. Fits 2008-2009 Ford Taurus X, front. Fits 2005-2007 Ford Five Hundred, front. Fits 2005-2007 Ford Freestyle, front. Fits 2005-2007 Mercury Montego, front. This part number 4312-54088 is listed for these front applications.
Key Features
- DFC 3000 ceramic brake pads for stable friction across a wide temperature range
- Low-dust pad formulation for cleaner wheel maintenance
- Post-cured and scorched pad construction to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors that are ready to install without additional cleaning
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit is designed for drivers replacing worn front brake components on the Ford Taurus, Ford Taurus X, Ford Five Hundred, Ford Freestyle, and Mercury Montego. The rotor design follows OEM-style G3000/G11H18 cast iron specifications and is machined to tight tolerances for consistent fit and braking stability. The coated surface helps protect against corrosion, while the non-directional finish supports quieter operation and more even pad contact. The 3000 ceramic pads are formulated for reliable stopping performance, fade resistance, and low dust, making this kit a practical choice for everyday street use.
Part number 4312-54088 is a direct-fit front brake service solution for these specific vehicles and model years. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by rotor wear or surface variation
- Rust buildup on exposed rotor surfaces
- Excessive brake dust from older pad materials
- Reduced stopping consistency from heat-related fade or worn friction material
Installation Notes
Before installation, confirm front axle fitment for your exact vehicle year and model. Inspect calipers, slides, and mounting points for wear or corrosion, and replace any damaged components as needed. Clean the hub mounting surface thoroughly so the coated rotor seats flat, and follow proper brake bedding procedures after installation to help establish even pad transfer.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and every rotor is checked against OE specifications during production. The rotors carry a 12-month warranty against defects in material and workmanship. The 3000 ceramic pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
