Dynamite Friction 4312-54089 Disc Brake Kit - Front
Front Brake Kit for Mercury Sable
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-54089, is a front disc brake service kit for 2008-2009 Mercury Sable models. It combines coated rotors, ceramic pads, and brake hardware components in one service package for a complete front brake refresh.
Key Features
- Fits 2008-2009 Mercury Sable, front
- DFC 3000 ceramic brake pads for stable friction and low dust
- Post-cured and scorched pad material for consistent initial braking response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The 4312-54089 brake kit is built for drivers servicing the front brakes on a Mercury Sable and looking for OE-style fit, finish, and braking consistency. The DFC GEOSPEC rotor design uses G3000/G11H18 cast iron and precision machining to meet OE specifications for durability and stability, while the ceramic pad formulation is engineered for reliable stopping performance across a wide temperature range. This front brake kit for 2008-2009 Mercury Sable is a practical choice when you want coated rotors, low-dust pads, and matched hardware in one application-specific package. Part number 4312-54089 is also a useful reference when searching for a front Mercury Sable brake kit by exact application.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware components
- Rotor rust buildup on exposed braking surfaces
- Reduced stopping consistency from worn front brake parts
- Excess brake dust from older pad materials
Installation Notes and Tips
Before installation, inspect calipers, slides, and hoses for wear or sticking that could affect brake performance. Clean the hub mounting surface, verify rotor seating, and follow proper torque procedures during assembly. After installation, perform a controlled bed-in procedure to help the pads and rotors establish an even transfer layer. This front brake kit is intended for 2008-2009 Mercury Sable applications only, so confirm vehicle year and front-position fitment before ordering.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical dimensions and balance, and each rotor carries a 12-month warranty against defects in material and workmanship. The pad and hardware components are built to support consistent braking performance and corrosion resistance in everyday service. If you are sourcing 4312-54089 for a Mercury Sable front brake repair, this kit provides matched components designed around OE specifications.
Original: $229.27
-65%$229.27
$80.24Dynamite Friction 4312-54089 Disc Brake Kit - Front
Front Brake Kit for Mercury Sable
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-54089, is a front disc brake service kit for 2008-2009 Mercury Sable models. It combines coated rotors, ceramic pads, and brake hardware components in one service package for a complete front brake refresh.
Key Features
- Fits 2008-2009 Mercury Sable, front
- DFC 3000 ceramic brake pads for stable friction and low dust
- Post-cured and scorched pad material for consistent initial braking response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The 4312-54089 brake kit is built for drivers servicing the front brakes on a Mercury Sable and looking for OE-style fit, finish, and braking consistency. The DFC GEOSPEC rotor design uses G3000/G11H18 cast iron and precision machining to meet OE specifications for durability and stability, while the ceramic pad formulation is engineered for reliable stopping performance across a wide temperature range. This front brake kit for 2008-2009 Mercury Sable is a practical choice when you want coated rotors, low-dust pads, and matched hardware in one application-specific package. Part number 4312-54089 is also a useful reference when searching for a front Mercury Sable brake kit by exact application.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware components
- Rotor rust buildup on exposed braking surfaces
- Reduced stopping consistency from worn front brake parts
- Excess brake dust from older pad materials
Installation Notes and Tips
Before installation, inspect calipers, slides, and hoses for wear or sticking that could affect brake performance. Clean the hub mounting surface, verify rotor seating, and follow proper torque procedures during assembly. After installation, perform a controlled bed-in procedure to help the pads and rotors establish an even transfer layer. This front brake kit is intended for 2008-2009 Mercury Sable applications only, so confirm vehicle year and front-position fitment before ordering.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical dimensions and balance, and each rotor carries a 12-month warranty against defects in material and workmanship. The pad and hardware components are built to support consistent braking performance and corrosion resistance in everyday service. If you are sourcing 4312-54089 for a Mercury Sable front brake repair, this kit provides matched components designed around OE specifications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Kit for Mercury Sable
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-54089, is a front disc brake service kit for 2008-2009 Mercury Sable models. It combines coated rotors, ceramic pads, and brake hardware components in one service package for a complete front brake refresh.
Key Features
- Fits 2008-2009 Mercury Sable, front
- DFC 3000 ceramic brake pads for stable friction and low dust
- Post-cured and scorched pad material for consistent initial braking response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The 4312-54089 brake kit is built for drivers servicing the front brakes on a Mercury Sable and looking for OE-style fit, finish, and braking consistency. The DFC GEOSPEC rotor design uses G3000/G11H18 cast iron and precision machining to meet OE specifications for durability and stability, while the ceramic pad formulation is engineered for reliable stopping performance across a wide temperature range. This front brake kit for 2008-2009 Mercury Sable is a practical choice when you want coated rotors, low-dust pads, and matched hardware in one application-specific package. Part number 4312-54089 is also a useful reference when searching for a front Mercury Sable brake kit by exact application.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware components
- Rotor rust buildup on exposed braking surfaces
- Reduced stopping consistency from worn front brake parts
- Excess brake dust from older pad materials
Installation Notes and Tips
Before installation, inspect calipers, slides, and hoses for wear or sticking that could affect brake performance. Clean the hub mounting surface, verify rotor seating, and follow proper torque procedures during assembly. After installation, perform a controlled bed-in procedure to help the pads and rotors establish an even transfer layer. This front brake kit is intended for 2008-2009 Mercury Sable applications only, so confirm vehicle year and front-position fitment before ordering.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical dimensions and balance, and each rotor carries a 12-month warranty against defects in material and workmanship. The pad and hardware components are built to support consistent braking performance and corrosion resistance in everyday service. If you are sourcing 4312-54089 for a Mercury Sable front brake repair, this kit provides matched components designed around OE specifications.
