Dynamite Friction 4514-47053 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Dynamite Friction 4514-47053 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Brake Kit for S10, S10 Blazer, S15 and Sonoma
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for front and rear brake service on select Chevrolet, GMC, Buick, and Oldsmobile applications. Part number 4514-47053 combines coated rotors, advanced friction pads, and matching brake service components for a complete brake refresh.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable braking performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation without oil removal
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware designed with PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function
Product Details
DFC developed the 5000 Advanced Brake Pads line to meet the friction requirements of modern vehicles across a range of axle applications. For this kit, the pads are paired with DFC GeoSpec coated rotors that use G3000/G11H18 cast iron and tight machining tolerances to match OE specifications for durability, stability, and consistent braking feel. The result is a service kit suited for drivers looking to restore braking performance on a Chevrolet S10 brake job, a GMC S15 Jimmy brake replacement, or a Buick Riviera and Oldsmobile Toronado rear drum brake service where listed.
This part number, 4514-47053, is also a practical search match for shoppers looking for a front and rear brake kit for 1983-1991 Chevrolet S10, 1983-1991 Chevrolet S10 Blazer, 1983-1991 GMC S15 Jimmy, 1983-1990 GMC S15, 1991 GMC Sonoma, and 1991 Oldsmobile Bravada. It also covers rear drum brake applications for 1979-1985 Buick Riviera and 1979-1983 Oldsmobile Toronado.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads, fatigued hardware, or uneven rotor surfaces
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction material
- Pulsation or uneven braking from rotor wear or finish issues
- Reduced pedal confidence from aged brake components
Installation Notes
Inspect calipers, drums, wheel cylinders, and brake lines before installation. Clean all mating surfaces, follow the vehicle-specific service procedure, and bed in the new pads according to the friction material instructions. The coated rotors are shipped dry and ready to install, which helps reduce prep time during brake service.
Quality Assurance
Each DFC GeoSpec rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-47053 is built to OE-style standards for fitment and service reliability.
Original: $350.48
-65%$350.48
$122.67Dynamite Friction 4514-47053 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Brake Kit for S10, S10 Blazer, S15 and Sonoma
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for front and rear brake service on select Chevrolet, GMC, Buick, and Oldsmobile applications. Part number 4514-47053 combines coated rotors, advanced friction pads, and matching brake service components for a complete brake refresh.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable braking performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation without oil removal
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware designed with PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function
Product Details
DFC developed the 5000 Advanced Brake Pads line to meet the friction requirements of modern vehicles across a range of axle applications. For this kit, the pads are paired with DFC GeoSpec coated rotors that use G3000/G11H18 cast iron and tight machining tolerances to match OE specifications for durability, stability, and consistent braking feel. The result is a service kit suited for drivers looking to restore braking performance on a Chevrolet S10 brake job, a GMC S15 Jimmy brake replacement, or a Buick Riviera and Oldsmobile Toronado rear drum brake service where listed.
This part number, 4514-47053, is also a practical search match for shoppers looking for a front and rear brake kit for 1983-1991 Chevrolet S10, 1983-1991 Chevrolet S10 Blazer, 1983-1991 GMC S15 Jimmy, 1983-1990 GMC S15, 1991 GMC Sonoma, and 1991 Oldsmobile Bravada. It also covers rear drum brake applications for 1979-1985 Buick Riviera and 1979-1983 Oldsmobile Toronado.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads, fatigued hardware, or uneven rotor surfaces
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction material
- Pulsation or uneven braking from rotor wear or finish issues
- Reduced pedal confidence from aged brake components
Installation Notes
Inspect calipers, drums, wheel cylinders, and brake lines before installation. Clean all mating surfaces, follow the vehicle-specific service procedure, and bed in the new pads according to the friction material instructions. The coated rotors are shipped dry and ready to install, which helps reduce prep time during brake service.
Quality Assurance
Each DFC GeoSpec rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-47053 is built to OE-style standards for fitment and service reliability.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Brake Kit for S10, S10 Blazer, S15 and Sonoma
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for front and rear brake service on select Chevrolet, GMC, Buick, and Oldsmobile applications. Part number 4514-47053 combines coated rotors, advanced friction pads, and matching brake service components for a complete brake refresh.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable braking performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation without oil removal
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware designed with PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function
Product Details
DFC developed the 5000 Advanced Brake Pads line to meet the friction requirements of modern vehicles across a range of axle applications. For this kit, the pads are paired with DFC GeoSpec coated rotors that use G3000/G11H18 cast iron and tight machining tolerances to match OE specifications for durability, stability, and consistent braking feel. The result is a service kit suited for drivers looking to restore braking performance on a Chevrolet S10 brake job, a GMC S15 Jimmy brake replacement, or a Buick Riviera and Oldsmobile Toronado rear drum brake service where listed.
This part number, 4514-47053, is also a practical search match for shoppers looking for a front and rear brake kit for 1983-1991 Chevrolet S10, 1983-1991 Chevrolet S10 Blazer, 1983-1991 GMC S15 Jimmy, 1983-1990 GMC S15, 1991 GMC Sonoma, and 1991 Oldsmobile Bravada. It also covers rear drum brake applications for 1979-1985 Buick Riviera and 1979-1983 Oldsmobile Toronado.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads, fatigued hardware, or uneven rotor surfaces
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction material
- Pulsation or uneven braking from rotor wear or finish issues
- Reduced pedal confidence from aged brake components
Installation Notes
Inspect calipers, drums, wheel cylinders, and brake lines before installation. Clean all mating surfaces, follow the vehicle-specific service procedure, and bed in the new pads according to the friction material instructions. The coated rotors are shipped dry and ready to install, which helps reduce prep time during brake service.
Quality Assurance
Each DFC GeoSpec rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4514-47053 is built to OE-style standards for fitment and service reliability.
