Dynamite Friction 4514-47140 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Dynamite Friction 4514-47140 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Brake Kit for S10, Blazer, Jimmy, Sonoma
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for front and rear brake service on select Chevrolet, GMC, and Oldsmobile applications. Part number 4514-47140 combines coated rotors, advanced friction pads, and drum brake service components for a complete brake refresh on vehicles such as the Chevrolet S10, Blazer, GMC Jimmy, and Sonoma.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable braking performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, ready-to-install rotors with a non-directional finish for smoother pad bedding
- Machined to OEM-style tolerances using G3000/G11H18 cast iron specification
- Disc brake hardware engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC’s BrandLine combines rotor, pad, drum, shoe, and hardware service components into one brake kit for vehicles that need front and rear brake attention. Part number 4514-47140 is a fitment-based solution for 1992-1996 Chevrolet S10, 1995-1996 Chevrolet Blazer, 1997 Chevrolet Blazer, 1992-1996 GMC Jimmy, 1997 GMC Jimmy, 1992-1996 GMC Sonoma, 1997 GMC Sonoma, 1992-1994 Chevrolet S10 Blazer, and 1992-1996 Oldsmobile Bravada. The coated rotor design helps reduce corrosion on exposed surfaces, while the pad formulation and rotor finish are intended to support quiet, consistent stopping performance on daily-driven trucks and SUVs.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads, fatigued hardware, or uneven rotor surfaces
- Rust buildup on rotor hats and friction-adjacent surfaces
- Longer stopping distances caused by worn friction material
- Pulsation or rough braking from rotor wear or finish inconsistency
- Rear brake service needs on drum-equipped applications
Installation Notes
Verify exact vehicle configuration before ordering, especially on 1995-1996 Chevrolet S10 and 1995-1996 GMC Sonoma applications with package-specific notes. Clean all mating surfaces during brake service, inspect calipers and drum brake components for wear, and follow proper bedding procedures after installation. This part number, 4514-47140, is intended for front and rear brake service on the listed applications.
Quality Assurance
DFC states that its brake pads are post-cured and scorched for consistent friction behavior, and its GeoSpec rotors are machined, balanced where required, and inspected for critical dimensions against OE-style specifications. The rotors carry a 12-month warranty against defects in material and workmanship.
Original: $337.04
-65%$337.04
$117.96Dynamite Friction 4514-47140 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Brake Kit for S10, Blazer, Jimmy, Sonoma
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for front and rear brake service on select Chevrolet, GMC, and Oldsmobile applications. Part number 4514-47140 combines coated rotors, advanced friction pads, and drum brake service components for a complete brake refresh on vehicles such as the Chevrolet S10, Blazer, GMC Jimmy, and Sonoma.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable braking performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, ready-to-install rotors with a non-directional finish for smoother pad bedding
- Machined to OEM-style tolerances using G3000/G11H18 cast iron specification
- Disc brake hardware engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC’s BrandLine combines rotor, pad, drum, shoe, and hardware service components into one brake kit for vehicles that need front and rear brake attention. Part number 4514-47140 is a fitment-based solution for 1992-1996 Chevrolet S10, 1995-1996 Chevrolet Blazer, 1997 Chevrolet Blazer, 1992-1996 GMC Jimmy, 1997 GMC Jimmy, 1992-1996 GMC Sonoma, 1997 GMC Sonoma, 1992-1994 Chevrolet S10 Blazer, and 1992-1996 Oldsmobile Bravada. The coated rotor design helps reduce corrosion on exposed surfaces, while the pad formulation and rotor finish are intended to support quiet, consistent stopping performance on daily-driven trucks and SUVs.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads, fatigued hardware, or uneven rotor surfaces
- Rust buildup on rotor hats and friction-adjacent surfaces
- Longer stopping distances caused by worn friction material
- Pulsation or rough braking from rotor wear or finish inconsistency
- Rear brake service needs on drum-equipped applications
Installation Notes
Verify exact vehicle configuration before ordering, especially on 1995-1996 Chevrolet S10 and 1995-1996 GMC Sonoma applications with package-specific notes. Clean all mating surfaces during brake service, inspect calipers and drum brake components for wear, and follow proper bedding procedures after installation. This part number, 4514-47140, is intended for front and rear brake service on the listed applications.
Quality Assurance
DFC states that its brake pads are post-cured and scorched for consistent friction behavior, and its GeoSpec rotors are machined, balanced where required, and inspected for critical dimensions against OE-style specifications. The rotors carry a 12-month warranty against defects in material and workmanship.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Brake Kit for S10, Blazer, Jimmy, Sonoma
The DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for front and rear brake service on select Chevrolet, GMC, and Oldsmobile applications. Part number 4514-47140 combines coated rotors, advanced friction pads, and drum brake service components for a complete brake refresh on vehicles such as the Chevrolet S10, Blazer, GMC Jimmy, and Sonoma.
Key Features
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable braking performance
- Scorched pad surface to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, ready-to-install rotors with a non-directional finish for smoother pad bedding
- Machined to OEM-style tolerances using G3000/G11H18 cast iron specification
- Disc brake hardware engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC’s BrandLine combines rotor, pad, drum, shoe, and hardware service components into one brake kit for vehicles that need front and rear brake attention. Part number 4514-47140 is a fitment-based solution for 1992-1996 Chevrolet S10, 1995-1996 Chevrolet Blazer, 1997 Chevrolet Blazer, 1992-1996 GMC Jimmy, 1997 GMC Jimmy, 1992-1996 GMC Sonoma, 1997 GMC Sonoma, 1992-1994 Chevrolet S10 Blazer, and 1992-1996 Oldsmobile Bravada. The coated rotor design helps reduce corrosion on exposed surfaces, while the pad formulation and rotor finish are intended to support quiet, consistent stopping performance on daily-driven trucks and SUVs.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads, fatigued hardware, or uneven rotor surfaces
- Rust buildup on rotor hats and friction-adjacent surfaces
- Longer stopping distances caused by worn friction material
- Pulsation or rough braking from rotor wear or finish inconsistency
- Rear brake service needs on drum-equipped applications
Installation Notes
Verify exact vehicle configuration before ordering, especially on 1995-1996 Chevrolet S10 and 1995-1996 GMC Sonoma applications with package-specific notes. Clean all mating surfaces during brake service, inspect calipers and drum brake components for wear, and follow proper bedding procedures after installation. This part number, 4514-47140, is intended for front and rear brake service on the listed applications.
Quality Assurance
DFC states that its brake pads are post-cured and scorched for consistent friction behavior, and its GeoSpec rotors are machined, balanced where required, and inspected for critical dimensions against OE-style specifications. The rotors carry a 12-month warranty against defects in material and workmanship.
