Dynamite Friction 7212-47099 Disc Brake Kit - Front
Front Brake Kit for Select GM Applications
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver- 1214 Heavy Duty Brake Pad - Hardware kit is a front disc brake service kit built for select Chevrolet, GMC, Buick, Oldsmobile, and Pontiac applications from 1982-1995. It combines corrosion-protected rotors, heavy duty brake pads, and matching service components in one package for a straightforward brake refresh.
Part number 7212-47099 is a fitment-based solution for drivers servicing front brakes on vehicles such as the Chevrolet S10, Camaro, and GMC Sonoma. The DFC brake kit line is organized to simplify brake service by grouping the rotor, pad, and related components needed for the application.
Key Features
- Front disc brake kit for select GM cars and trucks
- Drilled and slotted silver rotors for improved heat management and a clean finish
- Heavy duty brake pads matched to the rotor application
- Corrosion protection built into the rotor design
- Application-specific coverage for front brake service
- Part number 7212-47099 for ordering and catalog lookup
Detailed Description
Dynamite Friction DFC brake service kits are built to streamline front brake replacement by pairing the correct rotor and pad combination for the vehicle application. This kit is listed for a wide range of front-fit GM platforms, including the Chevrolet S10, S10 Blazer, Blazer, Camaro, Monte Carlo, El Camino, Malibu, and the GMC Jimmy, Sonoma, S15, and S15 Jimmy, along with Buick, Oldsmobile, and Pontiac models in the same fitment family. The drilled and slotted rotor design adds a corrosion-protected finish and a performance-oriented surface profile for everyday brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Front brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged brake pads
- Brake noise caused by worn friction surfaces
- Corrosion on service-worn front rotors
- Brake service delays when sourcing parts separately
Installation Notes and Tips
Verify the vehicle’s front brake configuration before ordering, especially on 1995 Chevrolet Blazer 2-wheel ABS, 1995 GMC Jimmy excluding 4-wheel ABS, 1994 Chevrolet S10 Blazer excluding 4-wheel ABS, and 1989-1992 Chevrolet Camaro without the 1LE Performance Package. Confirm rotor and pad fitment against the exact year, make, model, and brake setup listed for the vehicle.
For best results, inspect caliper condition, slide hardware, and hub surfaces during brake service. Clean mating surfaces before installation and follow the vehicle manufacturer’s torque specifications and bedding procedure after installation.
Quality Assurance
DFC Complete Brake Kits are packaged to provide the correct brake components for the listed application in one service kit, with corrosion protection included in the rotor design.
Original: $305.15
-65%$305.15
$106.80Dynamite Friction 7212-47099 Disc Brake Kit - Front
Front Brake Kit for Select GM Applications
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver- 1214 Heavy Duty Brake Pad - Hardware kit is a front disc brake service kit built for select Chevrolet, GMC, Buick, Oldsmobile, and Pontiac applications from 1982-1995. It combines corrosion-protected rotors, heavy duty brake pads, and matching service components in one package for a straightforward brake refresh.
Part number 7212-47099 is a fitment-based solution for drivers servicing front brakes on vehicles such as the Chevrolet S10, Camaro, and GMC Sonoma. The DFC brake kit line is organized to simplify brake service by grouping the rotor, pad, and related components needed for the application.
Key Features
- Front disc brake kit for select GM cars and trucks
- Drilled and slotted silver rotors for improved heat management and a clean finish
- Heavy duty brake pads matched to the rotor application
- Corrosion protection built into the rotor design
- Application-specific coverage for front brake service
- Part number 7212-47099 for ordering and catalog lookup
Detailed Description
Dynamite Friction DFC brake service kits are built to streamline front brake replacement by pairing the correct rotor and pad combination for the vehicle application. This kit is listed for a wide range of front-fit GM platforms, including the Chevrolet S10, S10 Blazer, Blazer, Camaro, Monte Carlo, El Camino, Malibu, and the GMC Jimmy, Sonoma, S15, and S15 Jimmy, along with Buick, Oldsmobile, and Pontiac models in the same fitment family. The drilled and slotted rotor design adds a corrosion-protected finish and a performance-oriented surface profile for everyday brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Front brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged brake pads
- Brake noise caused by worn friction surfaces
- Corrosion on service-worn front rotors
- Brake service delays when sourcing parts separately
Installation Notes and Tips
Verify the vehicle’s front brake configuration before ordering, especially on 1995 Chevrolet Blazer 2-wheel ABS, 1995 GMC Jimmy excluding 4-wheel ABS, 1994 Chevrolet S10 Blazer excluding 4-wheel ABS, and 1989-1992 Chevrolet Camaro without the 1LE Performance Package. Confirm rotor and pad fitment against the exact year, make, model, and brake setup listed for the vehicle.
For best results, inspect caliper condition, slide hardware, and hub surfaces during brake service. Clean mating surfaces before installation and follow the vehicle manufacturer’s torque specifications and bedding procedure after installation.
Quality Assurance
DFC Complete Brake Kits are packaged to provide the correct brake components for the listed application in one service kit, with corrosion protection included in the rotor design.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Kit for Select GM Applications
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver- 1214 Heavy Duty Brake Pad - Hardware kit is a front disc brake service kit built for select Chevrolet, GMC, Buick, Oldsmobile, and Pontiac applications from 1982-1995. It combines corrosion-protected rotors, heavy duty brake pads, and matching service components in one package for a straightforward brake refresh.
Part number 7212-47099 is a fitment-based solution for drivers servicing front brakes on vehicles such as the Chevrolet S10, Camaro, and GMC Sonoma. The DFC brake kit line is organized to simplify brake service by grouping the rotor, pad, and related components needed for the application.
Key Features
- Front disc brake kit for select GM cars and trucks
- Drilled and slotted silver rotors for improved heat management and a clean finish
- Heavy duty brake pads matched to the rotor application
- Corrosion protection built into the rotor design
- Application-specific coverage for front brake service
- Part number 7212-47099 for ordering and catalog lookup
Detailed Description
Dynamite Friction DFC brake service kits are built to streamline front brake replacement by pairing the correct rotor and pad combination for the vehicle application. This kit is listed for a wide range of front-fit GM platforms, including the Chevrolet S10, S10 Blazer, Blazer, Camaro, Monte Carlo, El Camino, Malibu, and the GMC Jimmy, Sonoma, S15, and S15 Jimmy, along with Buick, Oldsmobile, and Pontiac models in the same fitment family. The drilled and slotted rotor design adds a corrosion-protected finish and a performance-oriented surface profile for everyday brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Front brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged brake pads
- Brake noise caused by worn friction surfaces
- Corrosion on service-worn front rotors
- Brake service delays when sourcing parts separately
Installation Notes and Tips
Verify the vehicle’s front brake configuration before ordering, especially on 1995 Chevrolet Blazer 2-wheel ABS, 1995 GMC Jimmy excluding 4-wheel ABS, 1994 Chevrolet S10 Blazer excluding 4-wheel ABS, and 1989-1992 Chevrolet Camaro without the 1LE Performance Package. Confirm rotor and pad fitment against the exact year, make, model, and brake setup listed for the vehicle.
For best results, inspect caliper condition, slide hardware, and hub surfaces during brake service. Clean mating surfaces before installation and follow the vehicle manufacturer’s torque specifications and bedding procedure after installation.
Quality Assurance
DFC Complete Brake Kits are packaged to provide the correct brake components for the listed application in one service kit, with corrosion protection included in the rotor design.
