Dynamite Friction 7502-02098 Disc Brake Kit - Rear
Porsche Rear Brake Kit for 1987-1995 Applications
This Dynamite Friction disc brake kit combines DFC drilled and slotted silver rotors with 5000 Advanced Brake Pads for rear brake service on select Porsche models. Part number 7502-02098 is built for drivers looking for a direct-fit rear brake solution for Porsche 944, Porsche 911, and Porsche 968 applications.
Key Features
- Disc brake kit for rear axle service
- DFC Rotors-Drilled and Slotted-Silver with 5000 Advanced Brake Pads
- Drilled and slotted rotor design for rear brake replacement
- Silver rotor finish for a clean installed appearance
- Fitment coverage for select Porsche 944, 911, and 968 models
- Part number 7502-02098 for accurate ordering and lookup
Fitment Details
- Fits 1992-1995 Porsche 968, rear.
- Fits 1990-1994 Porsche 911, rear, without Turbo-Look Package.
- Fits 1990-1991 Porsche 944, rear, Koni Sport Suspension.
- Fits 1989 Porsche 911, rear.
- Fits 1987-1989 Porsche 944, rear.
Product Description
Part number 7502-02098 is a rear disc brake kit from Dynamite Friction that pairs drilled and slotted DFC rotors with 5000 Advanced Brake Pads. It is listed for select Porsche rear brake applications, including Porsche 944, Porsche 911, and Porsche 968 models across the 1987-1995 model years. The drilled and slotted rotor design is intended for rear brake service where consistent pad contact and rotor surface management are priorities.
The DFC Rotors-Drilled and Slotted-Silver with 5000 Advanced Brake Pads product line is positioned as a matched rotor-and-pad service kit for rear axle maintenance. For buyers searching for a Porsche 944 rear brake kit, Porsche 911 rear brake kit, or Porsche 968 rear brake kit, this application-specific setup helps simplify part selection by combining the rotor and pad components under one part number, 7502-02098.
Common Reasons for Replacement
- Rear brake noise during braking
- Rotor scoring, grooves, or uneven wear
- Brake pad wear requiring a matched replacement set
- Pulsation or vibration from worn rear rotors
- Reduced braking consistency on the rear axle
Installation Notes
Verify rear axle fitment against the vehicle listing before installation. This kit is listed for 1992-1995 Porsche 968 rear, 1990-1994 Porsche 911 rear without Turbo-Look Package, 1990-1991 Porsche 944 rear with Koni Sport Suspension, 1989 Porsche 911 rear, and 1987-1989 Porsche 944 rear. Confirm rotor dimensions, brake hardware condition, and caliper compatibility during service.
Quality Assurance
Dynamite Friction identifies this kit as a DFC rotor and pad combination for the specified Porsche rear brake applications. Part number 7502-02098 is cataloged for accurate fitment lookup and application matching.
Original: $295.10
-65%$295.10
$103.28Dynamite Friction 7502-02098 Disc Brake Kit - Rear
Porsche Rear Brake Kit for 1987-1995 Applications
This Dynamite Friction disc brake kit combines DFC drilled and slotted silver rotors with 5000 Advanced Brake Pads for rear brake service on select Porsche models. Part number 7502-02098 is built for drivers looking for a direct-fit rear brake solution for Porsche 944, Porsche 911, and Porsche 968 applications.
Key Features
- Disc brake kit for rear axle service
- DFC Rotors-Drilled and Slotted-Silver with 5000 Advanced Brake Pads
- Drilled and slotted rotor design for rear brake replacement
- Silver rotor finish for a clean installed appearance
- Fitment coverage for select Porsche 944, 911, and 968 models
- Part number 7502-02098 for accurate ordering and lookup
Fitment Details
- Fits 1992-1995 Porsche 968, rear.
- Fits 1990-1994 Porsche 911, rear, without Turbo-Look Package.
- Fits 1990-1991 Porsche 944, rear, Koni Sport Suspension.
- Fits 1989 Porsche 911, rear.
- Fits 1987-1989 Porsche 944, rear.
Product Description
Part number 7502-02098 is a rear disc brake kit from Dynamite Friction that pairs drilled and slotted DFC rotors with 5000 Advanced Brake Pads. It is listed for select Porsche rear brake applications, including Porsche 944, Porsche 911, and Porsche 968 models across the 1987-1995 model years. The drilled and slotted rotor design is intended for rear brake service where consistent pad contact and rotor surface management are priorities.
The DFC Rotors-Drilled and Slotted-Silver with 5000 Advanced Brake Pads product line is positioned as a matched rotor-and-pad service kit for rear axle maintenance. For buyers searching for a Porsche 944 rear brake kit, Porsche 911 rear brake kit, or Porsche 968 rear brake kit, this application-specific setup helps simplify part selection by combining the rotor and pad components under one part number, 7502-02098.
Common Reasons for Replacement
- Rear brake noise during braking
- Rotor scoring, grooves, or uneven wear
- Brake pad wear requiring a matched replacement set
- Pulsation or vibration from worn rear rotors
- Reduced braking consistency on the rear axle
Installation Notes
Verify rear axle fitment against the vehicle listing before installation. This kit is listed for 1992-1995 Porsche 968 rear, 1990-1994 Porsche 911 rear without Turbo-Look Package, 1990-1991 Porsche 944 rear with Koni Sport Suspension, 1989 Porsche 911 rear, and 1987-1989 Porsche 944 rear. Confirm rotor dimensions, brake hardware condition, and caliper compatibility during service.
Quality Assurance
Dynamite Friction identifies this kit as a DFC rotor and pad combination for the specified Porsche rear brake applications. Part number 7502-02098 is cataloged for accurate fitment lookup and application matching.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Porsche Rear Brake Kit for 1987-1995 Applications
This Dynamite Friction disc brake kit combines DFC drilled and slotted silver rotors with 5000 Advanced Brake Pads for rear brake service on select Porsche models. Part number 7502-02098 is built for drivers looking for a direct-fit rear brake solution for Porsche 944, Porsche 911, and Porsche 968 applications.
Key Features
- Disc brake kit for rear axle service
- DFC Rotors-Drilled and Slotted-Silver with 5000 Advanced Brake Pads
- Drilled and slotted rotor design for rear brake replacement
- Silver rotor finish for a clean installed appearance
- Fitment coverage for select Porsche 944, 911, and 968 models
- Part number 7502-02098 for accurate ordering and lookup
Fitment Details
- Fits 1992-1995 Porsche 968, rear.
- Fits 1990-1994 Porsche 911, rear, without Turbo-Look Package.
- Fits 1990-1991 Porsche 944, rear, Koni Sport Suspension.
- Fits 1989 Porsche 911, rear.
- Fits 1987-1989 Porsche 944, rear.
Product Description
Part number 7502-02098 is a rear disc brake kit from Dynamite Friction that pairs drilled and slotted DFC rotors with 5000 Advanced Brake Pads. It is listed for select Porsche rear brake applications, including Porsche 944, Porsche 911, and Porsche 968 models across the 1987-1995 model years. The drilled and slotted rotor design is intended for rear brake service where consistent pad contact and rotor surface management are priorities.
The DFC Rotors-Drilled and Slotted-Silver with 5000 Advanced Brake Pads product line is positioned as a matched rotor-and-pad service kit for rear axle maintenance. For buyers searching for a Porsche 944 rear brake kit, Porsche 911 rear brake kit, or Porsche 968 rear brake kit, this application-specific setup helps simplify part selection by combining the rotor and pad components under one part number, 7502-02098.
Common Reasons for Replacement
- Rear brake noise during braking
- Rotor scoring, grooves, or uneven wear
- Brake pad wear requiring a matched replacement set
- Pulsation or vibration from worn rear rotors
- Reduced braking consistency on the rear axle
Installation Notes
Verify rear axle fitment against the vehicle listing before installation. This kit is listed for 1992-1995 Porsche 968 rear, 1990-1994 Porsche 911 rear without Turbo-Look Package, 1990-1991 Porsche 944 rear with Koni Sport Suspension, 1989 Porsche 911 rear, and 1987-1989 Porsche 944 rear. Confirm rotor dimensions, brake hardware condition, and caliper compatibility during service.
Quality Assurance
Dynamite Friction identifies this kit as a DFC rotor and pad combination for the specified Porsche rear brake applications. Part number 7502-02098 is cataloged for accurate fitment lookup and application matching.
