Dynamite Friction 8502-47021 Disc Brake Kit - Rear
Rear Brake Kit for Select GM Applications
Dynamite Friction DFC Rotors-Drilled and Slotted-Black with 5000 Advanced Brake Pads, part number 8502-47021, is a rear disc brake kit for select Chevrolet, Buick, and Pontiac vehicles. It combines drilled and slotted rear rotors with matching brake pads for drivers servicing worn rear brake components on the Chevrolet Impala, Buick LaCrosse, Buick Allure, and Pontiac Grand Prix.
Key Features
- Rear disc brake kit from Dynamite Friction
- DFC Rotors-Drilled and Slotted-Black with 5000 Advanced Brake Pads product line
- Designed for rear brake service on select GM sedans
- Drilled and slotted rotor design for consistent brake surface contact
- Part number 8502-47021 for application matching and ordering
Fitment Details
- Fits 2014-2016 Chevrolet Impala Limited, rear, excluding Police & Taxi.
- Fits 2012-2013 Chevrolet Impala, rear, excluding Police & Taxi.
- Fits 2011 Chevrolet Impala, rear.
- Fits 2005-2009 Buick Allure, rear.
- Fits 2005-2009 Buick LaCrosse, rear.
- Fits 2004-2008 Pontiac Grand Prix, rear.
Product Description
The DFC Rotors-Drilled and Slotted-Black with 5000 Advanced Brake Pads line is built for rear brake replacement on vehicles that need a direct-fit service kit for everyday driving and routine brake maintenance. This 8502-47021 kit is listed for the rear position on the Chevrolet Impala, Chevrolet Impala Limited, Buick Allure, Buick LaCrosse, and Pontiac Grand Prix, with Police and Taxi exclusions noted where applicable. If you are searching for a rear brake kit for 2011 Chevrolet Impala, rear brake parts for 2005-2009 Buick LaCrosse, or a rear disc brake kit for 2004-2008 Pontiac Grand Prix, this application-specific listing helps narrow the match.
What It Can Address
- Rear brake noise from worn rotors or pads
- Brake pulsation caused by uneven rotor surfaces
- Reduced stopping performance from brake wear
- Visible scoring, rust, or heat checking on rear rotors
- Pad wear that calls for a matched rear brake service kit
Installation Notes
Confirm year, make, model, and rear-position fitment before ordering. Review the vehicle notes carefully, especially the Police and Taxi exclusions for certain Impala applications. Inspect calipers, hoses, and mounting surfaces during brake service, and follow the vehicle manufacturer’s torque and bedding procedures after installation.
Quality Assurance
Dynamite Friction identifies this kit as part of its DFC Rotors-Drilled and Slotted-Black with 5000 Advanced Brake Pads line, which pairs drilled and slotted rear rotors with matching brake pads for a coordinated brake service solution. Part number 8502-47021 is the reference for this rear brake kit application.
Dynamite Friction 8502-47021 Disc Brake Kit - Rear
Rear Brake Kit for Select GM Applications
Dynamite Friction DFC Rotors-Drilled and Slotted-Black with 5000 Advanced Brake Pads, part number 8502-47021, is a rear disc brake kit for select Chevrolet, Buick, and Pontiac vehicles. It combines drilled and slotted rear rotors with matching brake pads for drivers servicing worn rear brake components on the Chevrolet Impala, Buick LaCrosse, Buick Allure, and Pontiac Grand Prix.
Key Features
- Rear disc brake kit from Dynamite Friction
- DFC Rotors-Drilled and Slotted-Black with 5000 Advanced Brake Pads product line
- Designed for rear brake service on select GM sedans
- Drilled and slotted rotor design for consistent brake surface contact
- Part number 8502-47021 for application matching and ordering
Fitment Details
- Fits 2014-2016 Chevrolet Impala Limited, rear, excluding Police & Taxi.
- Fits 2012-2013 Chevrolet Impala, rear, excluding Police & Taxi.
- Fits 2011 Chevrolet Impala, rear.
- Fits 2005-2009 Buick Allure, rear.
- Fits 2005-2009 Buick LaCrosse, rear.
- Fits 2004-2008 Pontiac Grand Prix, rear.
Product Description
The DFC Rotors-Drilled and Slotted-Black with 5000 Advanced Brake Pads line is built for rear brake replacement on vehicles that need a direct-fit service kit for everyday driving and routine brake maintenance. This 8502-47021 kit is listed for the rear position on the Chevrolet Impala, Chevrolet Impala Limited, Buick Allure, Buick LaCrosse, and Pontiac Grand Prix, with Police and Taxi exclusions noted where applicable. If you are searching for a rear brake kit for 2011 Chevrolet Impala, rear brake parts for 2005-2009 Buick LaCrosse, or a rear disc brake kit for 2004-2008 Pontiac Grand Prix, this application-specific listing helps narrow the match.
What It Can Address
- Rear brake noise from worn rotors or pads
- Brake pulsation caused by uneven rotor surfaces
- Reduced stopping performance from brake wear
- Visible scoring, rust, or heat checking on rear rotors
- Pad wear that calls for a matched rear brake service kit
Installation Notes
Confirm year, make, model, and rear-position fitment before ordering. Review the vehicle notes carefully, especially the Police and Taxi exclusions for certain Impala applications. Inspect calipers, hoses, and mounting surfaces during brake service, and follow the vehicle manufacturer’s torque and bedding procedures after installation.
Quality Assurance
Dynamite Friction identifies this kit as part of its DFC Rotors-Drilled and Slotted-Black with 5000 Advanced Brake Pads line, which pairs drilled and slotted rear rotors with matching brake pads for a coordinated brake service solution. Part number 8502-47021 is the reference for this rear brake kit application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Kit for Select GM Applications
Dynamite Friction DFC Rotors-Drilled and Slotted-Black with 5000 Advanced Brake Pads, part number 8502-47021, is a rear disc brake kit for select Chevrolet, Buick, and Pontiac vehicles. It combines drilled and slotted rear rotors with matching brake pads for drivers servicing worn rear brake components on the Chevrolet Impala, Buick LaCrosse, Buick Allure, and Pontiac Grand Prix.
Key Features
- Rear disc brake kit from Dynamite Friction
- DFC Rotors-Drilled and Slotted-Black with 5000 Advanced Brake Pads product line
- Designed for rear brake service on select GM sedans
- Drilled and slotted rotor design for consistent brake surface contact
- Part number 8502-47021 for application matching and ordering
Fitment Details
- Fits 2014-2016 Chevrolet Impala Limited, rear, excluding Police & Taxi.
- Fits 2012-2013 Chevrolet Impala, rear, excluding Police & Taxi.
- Fits 2011 Chevrolet Impala, rear.
- Fits 2005-2009 Buick Allure, rear.
- Fits 2005-2009 Buick LaCrosse, rear.
- Fits 2004-2008 Pontiac Grand Prix, rear.
Product Description
The DFC Rotors-Drilled and Slotted-Black with 5000 Advanced Brake Pads line is built for rear brake replacement on vehicles that need a direct-fit service kit for everyday driving and routine brake maintenance. This 8502-47021 kit is listed for the rear position on the Chevrolet Impala, Chevrolet Impala Limited, Buick Allure, Buick LaCrosse, and Pontiac Grand Prix, with Police and Taxi exclusions noted where applicable. If you are searching for a rear brake kit for 2011 Chevrolet Impala, rear brake parts for 2005-2009 Buick LaCrosse, or a rear disc brake kit for 2004-2008 Pontiac Grand Prix, this application-specific listing helps narrow the match.
What It Can Address
- Rear brake noise from worn rotors or pads
- Brake pulsation caused by uneven rotor surfaces
- Reduced stopping performance from brake wear
- Visible scoring, rust, or heat checking on rear rotors
- Pad wear that calls for a matched rear brake service kit
Installation Notes
Confirm year, make, model, and rear-position fitment before ordering. Review the vehicle notes carefully, especially the Police and Taxi exclusions for certain Impala applications. Inspect calipers, hoses, and mounting surfaces during brake service, and follow the vehicle manufacturer’s torque and bedding procedures after installation.
Quality Assurance
Dynamite Friction identifies this kit as part of its DFC Rotors-Drilled and Slotted-Black with 5000 Advanced Brake Pads line, which pairs drilled and slotted rear rotors with matching brake pads for a coordinated brake service solution. Part number 8502-47021 is the reference for this rear brake kit application.
