PowerStop K8924-36 Disc Brake Kit - Front
Front Brake Upgrade for Silverado 1500 and Tahoe
PowerStop K8924-36 is a front brake pad and rotor kit built for truck and SUV use where towing, hauling, and repeated stops place extra demand on the braking system. It combines carbon-fiber ceramic pads with drilled and slotted rotors to help manage heat and maintain consistent pedal response.
Compatible With 2021-2024 Chevrolet Tahoe, front and 2023-2024 Chevrolet Silverado 1500, front, this Z36 Truck & Tow brake upgrade is aimed at drivers who want a direct-fit performance replacement for demanding street and work use.
Key Features
- Carbon-fiber ceramic friction material for severe-duty stopping performance with low dust output
- Drilled and slotted rotor surface helps dissipate heat during heavy braking and long descents
- Front rotor construction uses full cast iron for strength and durability
- Pad wear sensor included for supported applications
- Pad shims, brake lubricant, abutment clips, and premium stainless-steel hardware are included
- Performance-grade brake kit for front axle service
Z36 Truck & Tow Brake Line
The PowerStop Z36 Truck & Tow line is built for trucks, 4x4s, and SUVs that see a mix of daily driving and hard-use conditions. K8924-36 follows that formula with a pad compound and rotor design focused on heat control, stable braking, and straightforward bolt-on replacement for the front axle.
Detailed Description
PowerStop K8924-36 pairs carbon-fiber ceramic front pads with slotted X drilled rotors sized at 16.14 inches, or 410.0 mm, outside diameter. The rotor design promotes heat dissipation, which is important when a Chevrolet Silverado 1500 or Chevrolet Tahoe is used for towing, hauling, or mountain driving. The kit is engineered as a performance brake service solution for the front position and includes the supporting installation components listed in the product data.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake fade during repeated stops or long downhill braking
- Excessive brake dust from worn or outdated pads
- Uneven braking feel caused by worn front rotors
- Noise or vibration associated with aged brake components
- Reduced stopping confidence when towing or hauling
Installation Notes and Tips
Install K8924-36 on the front axle only and verify fitment against the vehicle year, make, and model before service. Clean the hub mounting surface, inspect calipers and brake hoses, and follow proper bedding procedures after installation to help the pads and rotors seat correctly. Use the included lubricant and hardware during assembly where specified by the service procedure.
Quality Assurance
PowerStop positions the Z36 Truck & Tow line as a direct-fit upgrade for hard-working trucks and SUVs, with components selected for performance braking and everyday drivability. K8924-36 is built around performance-grade materials and application-specific fitment for the listed Chevrolet Silverado 1500 and Chevrolet Tahoe front brake service.
PowerStop K8924-36 Disc Brake Kit - Front
Front Brake Upgrade for Silverado 1500 and Tahoe
PowerStop K8924-36 is a front brake pad and rotor kit built for truck and SUV use where towing, hauling, and repeated stops place extra demand on the braking system. It combines carbon-fiber ceramic pads with drilled and slotted rotors to help manage heat and maintain consistent pedal response.
Compatible With 2021-2024 Chevrolet Tahoe, front and 2023-2024 Chevrolet Silverado 1500, front, this Z36 Truck & Tow brake upgrade is aimed at drivers who want a direct-fit performance replacement for demanding street and work use.
Key Features
- Carbon-fiber ceramic friction material for severe-duty stopping performance with low dust output
- Drilled and slotted rotor surface helps dissipate heat during heavy braking and long descents
- Front rotor construction uses full cast iron for strength and durability
- Pad wear sensor included for supported applications
- Pad shims, brake lubricant, abutment clips, and premium stainless-steel hardware are included
- Performance-grade brake kit for front axle service
Z36 Truck & Tow Brake Line
The PowerStop Z36 Truck & Tow line is built for trucks, 4x4s, and SUVs that see a mix of daily driving and hard-use conditions. K8924-36 follows that formula with a pad compound and rotor design focused on heat control, stable braking, and straightforward bolt-on replacement for the front axle.
Detailed Description
PowerStop K8924-36 pairs carbon-fiber ceramic front pads with slotted X drilled rotors sized at 16.14 inches, or 410.0 mm, outside diameter. The rotor design promotes heat dissipation, which is important when a Chevrolet Silverado 1500 or Chevrolet Tahoe is used for towing, hauling, or mountain driving. The kit is engineered as a performance brake service solution for the front position and includes the supporting installation components listed in the product data.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake fade during repeated stops or long downhill braking
- Excessive brake dust from worn or outdated pads
- Uneven braking feel caused by worn front rotors
- Noise or vibration associated with aged brake components
- Reduced stopping confidence when towing or hauling
Installation Notes and Tips
Install K8924-36 on the front axle only and verify fitment against the vehicle year, make, and model before service. Clean the hub mounting surface, inspect calipers and brake hoses, and follow proper bedding procedures after installation to help the pads and rotors seat correctly. Use the included lubricant and hardware during assembly where specified by the service procedure.
Quality Assurance
PowerStop positions the Z36 Truck & Tow line as a direct-fit upgrade for hard-working trucks and SUVs, with components selected for performance braking and everyday drivability. K8924-36 is built around performance-grade materials and application-specific fitment for the listed Chevrolet Silverado 1500 and Chevrolet Tahoe front brake service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Upgrade for Silverado 1500 and Tahoe
PowerStop K8924-36 is a front brake pad and rotor kit built for truck and SUV use where towing, hauling, and repeated stops place extra demand on the braking system. It combines carbon-fiber ceramic pads with drilled and slotted rotors to help manage heat and maintain consistent pedal response.
Compatible With 2021-2024 Chevrolet Tahoe, front and 2023-2024 Chevrolet Silverado 1500, front, this Z36 Truck & Tow brake upgrade is aimed at drivers who want a direct-fit performance replacement for demanding street and work use.
Key Features
- Carbon-fiber ceramic friction material for severe-duty stopping performance with low dust output
- Drilled and slotted rotor surface helps dissipate heat during heavy braking and long descents
- Front rotor construction uses full cast iron for strength and durability
- Pad wear sensor included for supported applications
- Pad shims, brake lubricant, abutment clips, and premium stainless-steel hardware are included
- Performance-grade brake kit for front axle service
Z36 Truck & Tow Brake Line
The PowerStop Z36 Truck & Tow line is built for trucks, 4x4s, and SUVs that see a mix of daily driving and hard-use conditions. K8924-36 follows that formula with a pad compound and rotor design focused on heat control, stable braking, and straightforward bolt-on replacement for the front axle.
Detailed Description
PowerStop K8924-36 pairs carbon-fiber ceramic front pads with slotted X drilled rotors sized at 16.14 inches, or 410.0 mm, outside diameter. The rotor design promotes heat dissipation, which is important when a Chevrolet Silverado 1500 or Chevrolet Tahoe is used for towing, hauling, or mountain driving. The kit is engineered as a performance brake service solution for the front position and includes the supporting installation components listed in the product data.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake fade during repeated stops or long downhill braking
- Excessive brake dust from worn or outdated pads
- Uneven braking feel caused by worn front rotors
- Noise or vibration associated with aged brake components
- Reduced stopping confidence when towing or hauling
Installation Notes and Tips
Install K8924-36 on the front axle only and verify fitment against the vehicle year, make, and model before service. Clean the hub mounting surface, inspect calipers and brake hoses, and follow proper bedding procedures after installation to help the pads and rotors seat correctly. Use the included lubricant and hardware during assembly where specified by the service procedure.
Quality Assurance
PowerStop positions the Z36 Truck & Tow line as a direct-fit upgrade for hard-working trucks and SUVs, with components selected for performance braking and everyday drivability. K8924-36 is built around performance-grade materials and application-specific fitment for the listed Chevrolet Silverado 1500 and Chevrolet Tahoe front brake service.
