PowerStop KOE5471 Disc Brake Kit - Front and Rear
OE Replacement Brake Kit for Volkswagen
PowerStop KOE5471 is a front and rear brake pad and rotor kit built for OE stock replacement on select Volkswagen models. It combines ceramic brake pads with vented Autospecialty rotors to support consistent stopping performance and lower brake dust for daily driving.
Compatible with 2006-2009 Volkswagen Passat, 2008 Volkswagen R32, 2009-2012 Volkswagen CC, and 2012-2013 Volkswagen Golf R, this kit is a direct-fit solution for drivers looking for a complete brake refresh. PowerStop KOE5471 is also a practical search match for Volkswagen Golf R brake pads and rotors, Volkswagen CC brake kit, and Volkswagen Passat front and rear brake replacement.
Z17 Stock Replacement Brake Kit
The Z17 Stock Replacement line is PowerStop’s OE-style brake solution for everyday vehicles. This kit uses Z17 Evolution Plus ceramic pads with Autospecialty brake rotors and stainless-steel hardware, giving you a matched setup for stock replacement service on the Volkswagen Passat, Volkswagen CC, and Volkswagen Golf R.
- Ceramic friction material for low-dust operation
- Pad shims included for quieter brake service
- Pad wear sensor included
- Smooth pad surface type
- Front rotor outside diameter: 345.0
- Rear rotor outside diameter: 310.0
- Front and rear vented rotor construction
Detailed Product Overview
PowerStop KOE5471 is intended for drivers who want an OE stock replacement brake kit that restores braking performance without changing the factory-style setup. The ceramic pads are paired with vented front and rear rotors to support stable braking response, while the smooth pad surface and included shims help maintain a clean, serviceable installation. If you are searching for a PowerStop KOE5471 brake kit for a 2012-2013 Volkswagen Golf R or a 2009-2012 Volkswagen CC, this kit matches the listed applications directly.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or uneven pad contact
- Excess brake dust from aging friction material
- Pulsation caused by worn or resurfacing-unfriendly rotors
- Reduced braking consistency from heat-worn components
- Service needs on front and rear brake components at the same time
Installation Notes and Tips
Verify rotor diameter and fitment before installation: front 345.0 and rear 310.0. This kit is listed for front and rear positions only, so match the vehicle application exactly before service. Clean hub surfaces, inspect caliper hardware, and follow proper brake bedding procedures after installation to help the pads and rotors seat correctly.
Quality Assurance
PowerStop builds the Z17 Stock Replacement Brake Kit as an OE-standard, bolt-on replacement solution for daily-driver use. The combination of ceramic pads, vented rotors, and stainless-steel hardware reflects the brand’s focus on complete brake service parts for factory-style replacement.
PowerStop KOE5471 Disc Brake Kit - Front and Rear
OE Replacement Brake Kit for Volkswagen
PowerStop KOE5471 is a front and rear brake pad and rotor kit built for OE stock replacement on select Volkswagen models. It combines ceramic brake pads with vented Autospecialty rotors to support consistent stopping performance and lower brake dust for daily driving.
Compatible with 2006-2009 Volkswagen Passat, 2008 Volkswagen R32, 2009-2012 Volkswagen CC, and 2012-2013 Volkswagen Golf R, this kit is a direct-fit solution for drivers looking for a complete brake refresh. PowerStop KOE5471 is also a practical search match for Volkswagen Golf R brake pads and rotors, Volkswagen CC brake kit, and Volkswagen Passat front and rear brake replacement.
Z17 Stock Replacement Brake Kit
The Z17 Stock Replacement line is PowerStop’s OE-style brake solution for everyday vehicles. This kit uses Z17 Evolution Plus ceramic pads with Autospecialty brake rotors and stainless-steel hardware, giving you a matched setup for stock replacement service on the Volkswagen Passat, Volkswagen CC, and Volkswagen Golf R.
- Ceramic friction material for low-dust operation
- Pad shims included for quieter brake service
- Pad wear sensor included
- Smooth pad surface type
- Front rotor outside diameter: 345.0
- Rear rotor outside diameter: 310.0
- Front and rear vented rotor construction
Detailed Product Overview
PowerStop KOE5471 is intended for drivers who want an OE stock replacement brake kit that restores braking performance without changing the factory-style setup. The ceramic pads are paired with vented front and rear rotors to support stable braking response, while the smooth pad surface and included shims help maintain a clean, serviceable installation. If you are searching for a PowerStop KOE5471 brake kit for a 2012-2013 Volkswagen Golf R or a 2009-2012 Volkswagen CC, this kit matches the listed applications directly.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or uneven pad contact
- Excess brake dust from aging friction material
- Pulsation caused by worn or resurfacing-unfriendly rotors
- Reduced braking consistency from heat-worn components
- Service needs on front and rear brake components at the same time
Installation Notes and Tips
Verify rotor diameter and fitment before installation: front 345.0 and rear 310.0. This kit is listed for front and rear positions only, so match the vehicle application exactly before service. Clean hub surfaces, inspect caliper hardware, and follow proper brake bedding procedures after installation to help the pads and rotors seat correctly.
Quality Assurance
PowerStop builds the Z17 Stock Replacement Brake Kit as an OE-standard, bolt-on replacement solution for daily-driver use. The combination of ceramic pads, vented rotors, and stainless-steel hardware reflects the brand’s focus on complete brake service parts for factory-style replacement.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE Replacement Brake Kit for Volkswagen
PowerStop KOE5471 is a front and rear brake pad and rotor kit built for OE stock replacement on select Volkswagen models. It combines ceramic brake pads with vented Autospecialty rotors to support consistent stopping performance and lower brake dust for daily driving.
Compatible with 2006-2009 Volkswagen Passat, 2008 Volkswagen R32, 2009-2012 Volkswagen CC, and 2012-2013 Volkswagen Golf R, this kit is a direct-fit solution for drivers looking for a complete brake refresh. PowerStop KOE5471 is also a practical search match for Volkswagen Golf R brake pads and rotors, Volkswagen CC brake kit, and Volkswagen Passat front and rear brake replacement.
Z17 Stock Replacement Brake Kit
The Z17 Stock Replacement line is PowerStop’s OE-style brake solution for everyday vehicles. This kit uses Z17 Evolution Plus ceramic pads with Autospecialty brake rotors and stainless-steel hardware, giving you a matched setup for stock replacement service on the Volkswagen Passat, Volkswagen CC, and Volkswagen Golf R.
- Ceramic friction material for low-dust operation
- Pad shims included for quieter brake service
- Pad wear sensor included
- Smooth pad surface type
- Front rotor outside diameter: 345.0
- Rear rotor outside diameter: 310.0
- Front and rear vented rotor construction
Detailed Product Overview
PowerStop KOE5471 is intended for drivers who want an OE stock replacement brake kit that restores braking performance without changing the factory-style setup. The ceramic pads are paired with vented front and rear rotors to support stable braking response, while the smooth pad surface and included shims help maintain a clean, serviceable installation. If you are searching for a PowerStop KOE5471 brake kit for a 2012-2013 Volkswagen Golf R or a 2009-2012 Volkswagen CC, this kit matches the listed applications directly.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or uneven pad contact
- Excess brake dust from aging friction material
- Pulsation caused by worn or resurfacing-unfriendly rotors
- Reduced braking consistency from heat-worn components
- Service needs on front and rear brake components at the same time
Installation Notes and Tips
Verify rotor diameter and fitment before installation: front 345.0 and rear 310.0. This kit is listed for front and rear positions only, so match the vehicle application exactly before service. Clean hub surfaces, inspect caliper hardware, and follow proper brake bedding procedures after installation to help the pads and rotors seat correctly.
Quality Assurance
PowerStop builds the Z17 Stock Replacement Brake Kit as an OE-standard, bolt-on replacement solution for daily-driver use. The combination of ceramic pads, vented rotors, and stainless-steel hardware reflects the brand’s focus on complete brake service parts for factory-style replacement.
